Voltage Regulator | PartQuest™ Explore

Application Area

Power Electronics

Power Electronics

Copy of AC-DC Power Adapter - on Sun, 02/23/2020 - 13:35

Designer230968

pradana.sunu

Member for

5 years

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

<p>This is a circuit design for a typical wall-plug power adapter.</p>

<p>The sinusoidal source represents a typical US 60 Hz, 120V AC wall supply.</p>

<p>A transformer steps the voltage down to a manageable range to be rectified for a 5V DC supply, but the waveform is still sinusoidal.</p>

<p>The 4 diode bridge rectifier takes this lower amplitude sinusoidal signal and produces a DC biased result, but still with noise resulting from the rectification process.</p>

<p>The capacitor before the voltage regulator chip helps smooth some of this noise. Then the regulator chip provides a self-contained, feedback controlled mechanism to keep the output voltage at the specified value.</p>

<p>The output capacitor further smooths any output ripple and provides a reservoir of charge to supply any surge in current load that may be encountered.</p>

<p>This example includes a load resistor that allows the exploration of the effects of load. The load is varied during the simulation and it can be seen that above a load of 100 mA, the regulation of the output voltage begins to deteriorate.</p>

<p>The addition of a few components can make it possible for such a circuit to provide significantly higher power loads. See http://www.systemvision.com/design/ac-dc-power-adapter-current-boost-regulator for an example.</p>

About text formats

Copy of AC-DC Power Adapter - on Sun, 02/23/2020 - 13:35

Designer230968

pradana.sunu

Member for

5 years

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

<p>This is a circuit design for a typical wall-plug power adapter.</p>

<p>The sinusoidal source represents a typical US 60 Hz, 120V AC wall supply.</p>

<p>A transformer steps the voltage down to a manageable range to be rectified for a 5V DC supply, but the waveform is still sinusoidal.</p>

<p>The 4 diode bridge rectifier takes this lower amplitude sinusoidal signal and produces a DC biased result, but still with noise resulting from the rectification process.</p>

<p>The capacitor before the voltage regulator chip helps smooth some of this noise. Then the regulator chip provides a self-contained, feedback controlled mechanism to keep the output voltage at the specified value.</p>

<p>The output capacitor further smooths any output ripple and provides a reservoir of charge to supply any surge in current load that may be encountered.</p>

<p>This example includes a load resistor that allows the exploration of the effects of load. The load is varied during the simulation and it can be seen that above a load of 100 mA, the regulation of the output voltage begins to deteriorate.</p>

<p>The addition of a few components can make it possible for such a circuit to provide significantly higher power loads. See http://www.systemvision.com/design/ac-dc-power-adapter-current-boost-regulator for an example.</p>

About text formats

ePower_905

Designer152721

Member for

7 years 6 months

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

<p>This is a circuit design for a typical wall-plug power adapter.</p><p>The sinusoidal source represents a typical US 60 Hz, 120V AC wall supply.</p><p>A transformer steps the voltage down to a manageable range to be rectified for a 5V DC supply, but the waveform is still sinusoidal.</p><p>The 4 diode bridge rectifier takes this lower amplitude sinusoidal signal and produces a DC biased result, but still with noise resulting from the rectification process.</p><p>The capacitor before the voltage regulator chip helps smooth some of this noise. Then the regulator chip provides a self-contained, feedback controlled mechanism to keep the output voltage at the specified value.</p><p>The output capacitor further smooths any output ripple and provides a reservoir of charge to supply any surge in current load that may be encountered.</p><p>This example includes a load resistor that allows the exploration of the effects of load. The load is varied during the simulation and it can be seen that above a load of 100 mA, the regulation of the output voltage begins to deteriorate.</p><p>The addition of a few components can make it possible for such a circuit to provide significantly higher power loads. See http://www.systemvision.com/design/ac-dc-power-adapter-current-boost-regulator for an example.</p>

About text formats

Copy of AC-DC Power Adapter - on Wed, 01/29/2020 - 17:53

Designer229291

PartQuest Explore

Member for

5 years 2 months

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

<p>This is a circuit design for a typical wall-plug power adapter.</p><p>The sinusoidal source represents a typical US 60 Hz, 120V AC wall supply.</p><p>A transformer steps the voltage down to a manageable range to be rectified for a 5V DC supply, but the waveform is still sinusoidal.</p><p>The 4 diode bridge rectifier takes this lower amplitude sinusoidal signal and produces a DC biased result, but still with noise resulting from the rectification process.</p><p>The capacitor before the voltage regulator chip helps smooth some of this noise. Then the regulator chip provides a self-contained, feedback controlled mechanism to keep the output voltage at the specified value.</p><p>The output capacitor further smooths any output ripple and provides a reservoir of charge to supply any surge in current load that may be encountered.</p><p>This example includes a load resistor that allows the exploration of the effects of load. The load is varied during the simulation and it can be seen that above a load of 100 mA, the regulation of the output voltage begins to deteriorate.</p><p>The addition of a few components can make it possible for such a circuit to provide significantly higher power loads. See http://www.systemvision.com/design/ac-dc-power-adapter-current-boost-regulator for an example.</p>

About text formats

Copy of AC-DC Power Adapter - on Wed, 01/29/2020 - 12:05

Designer229282

PartQuest Explore

Member for

5 years 2 months

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

<p>This is a circuit design for a typical wall-plug power adapter.</p><p>The sinusoidal source represents a typical US 60 Hz, 120V AC wall supply.</p><p>A transformer steps the voltage down to a manageable range to be rectified for a 5V DC supply, but the waveform is still sinusoidal.</p><p>The 4 diode bridge rectifier takes this lower amplitude sinusoidal signal and produces a DC biased result, but still with noise resulting from the rectification process.</p><p>The capacitor before the voltage regulator chip helps smooth some of this noise. Then the regulator chip provides a self-contained, feedback controlled mechanism to keep the output voltage at the specified value.</p><p>The output capacitor further smooths any output ripple and provides a reservoir of charge to supply any surge in current load that may be encountered.</p><p>This example includes a load resistor that allows the exploration of the effects of load. The load is varied during the simulation and it can be seen that above a load of 100 mA, the regulation of the output voltage begins to deteriorate.</p><p>The addition of a few components can make it possible for such a circuit to provide significantly higher power loads. See http://www.systemvision.com/design/ac-dc-power-adapter-current-boost-regulator for an example.</p>

About text formats

AC-DC Power Adapter

Designer197889

Member for

6 years 11 months

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

<p>This is a circuit design for a typical wall-plug power adapter.  </p><p>The sinusoidal source represents a typical US 60 Hz, 120V AC wall supply.  </p><p>A transformer steps the voltage down to a manageable range to be rectified  for a 5V DC supply, but the waveform is still sinusoidal.  </p><p>The 4 diode bridge  rectifier takes this lower amplitude sinusoidal signal and  produces a   DC biased result, but still with noise resulting from the rectification process.</p><p>The capacitor before the voltage regulator chip helps smooth some of this noise.  Then the regulator chip provides a self-contained, feedback controlled mechanism to keep the output voltage at the specified value.  </p><p>The output capacitor further smooths any output ripple and provides a reservoir of charge to supply any surge in current load that may be encountered.</p><p>This example includes a load resistor that allows the exploration of the effects of load.  The load is varied during the simulation and it can be seen that above a load of 100 mA, the regulation of the output voltage begins to deteriorate.</p><p>The addition of a few components can make it possible for such a circuit to provide significantly higher power loads.  See http://www.systemvision.com/design/ac-dc-power-adapter-current-boost-regulator for an example.</p>

About text formats

12V to 5Vdc Regulated Voltage Supply

Designer124351

Member for

7 years 11 months

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

AC-DC Power Adapter fixed

Designer10

Member for

11 years 5 months

designs

groups

Big fan of VHDL-AMS

AC-DC Power Adapter noisy

Designer10

Member for

11 years 5 months

designs

groups

Big fan of VHDL-AMS