PMSM | PartQuest™ Explore

This design includes an ideal Permanent Magnet Synchronous Machine (PMSM) model, as well as a continuous D-Q controller and drive circuit. The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, a non-linear gain profile is specified in the "torque_assist_table" function, and a lead-lag compensator is used to improve system stability.

Note that this is a "tunable" design. Many of these system parameters can be changed by the user. Then a new simulation can be run and the updated results can be observed in the waveform viewers.

In a companion versions of this design, "EPS System with MotorSolve Generated PMSM Model and Ideal Drive", the ideal PMSM is replaced with a more realistic motor model generated by MotorSolve, the motor design tool. That model includes cogging torque, saturation and torque ripple behavior, which is seen to have a significant effect in this power steering application.

A second companion design, "EPS System with MotorSolve Generated PMSM Model and DQ/SVM Drive", uses both the MotorSolve motor model and also a sampled-data D-Q control algorithm and space-vector modulation (SVM) to control the switches in a power electronics circuit. This shows the ability to develop motor control and drives at the abstract level and also at the circuit level.

About text formats

Copy of Electric Power Steering System with Ideal PMSM and Drive - on Mon, 05/18/2020 - 23:53

richard.le
Designer231974

richard.le

Member for

4 years 5 months

9

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This design includes an ideal Permanent Magnet Synchronous Machine (PMSM) model, as well as a continuous D-Q controller and drive circuit. The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, a non-linear gain profile is specified in the "torque_assist_table" function, and a lead-lag compensator is used to improve system stability.

Note that this is a "tunable" design. Many of these system parameters can be changed by the user. Then a new simulation can be run and the updated results can be observed in the waveform viewers.

In a companion versions of this design, "EPS System with MotorSolve Generated PMSM Model and Ideal Drive", the ideal PMSM is replaced with a more realistic motor model generated by MotorSolve, the motor design tool. That model includes cogging torque, saturation and torque ripple behavior, which is seen to have a significant effect in this power steering application.

A second companion design, "EPS System with MotorSolve Generated PMSM Model and DQ/SVM Drive", uses both the MotorSolve motor model and also a sampled-data D-Q control algorithm and space-vector modulation (SVM) to control the switches in a power electronics circuit. This shows the ability to develop motor control and drives at the abstract level and also at the circuit level.

About text formats

PMSM Motor and PWM Drive_Middle

MASA
Designer208

MASA

Member for

9 years 8 months

579

designs

8

groups

Description

Permanent Magnet Synchronous Machine (PMSM) and PWM Drive circuit, with mechanical load. The drive includes a D-Q control algorithm, and uses space-vector modulation (SVM) to generate the digital PWM signals to the switches of the bridge.

The waveform plot in the upper left shows the drive command (light blue waveform), with values 0 to 1, where 1 is commanding the maximum quadrature current of 10 A. The motor's response is the output shaft angle in radians (orange waveform), and shows that increasing torque command results in greater rotational displacement against the load spring. The waveform plot in the upper right shows the actual motor torque (green waveform) and the A-phase current (dark blue waveform).

In a companion version of this design, "PMSM Motor And Ideal Drive", Clarke and Park Transform models are used with a continuous ideal voltage drive.This shows the ability to develop motor control and drives at the abstract level and at the circuit level.

In yet another version of this design example, the ideal switches will be replaced with actual power MOSFET device models. This can help in bridge component sizing and performance specification.

About text formats

PMSM Motor and PWM NMOS Drive_Lowest

MASA
Designer208

MASA

Member for

9 years 8 months

579

designs

8

groups

Description

Permanent Magnet Synchronous Machine (PMSM) and PWM Drive circuit, with mechanical load. The drive includes a D-Q control algorithm, and uses space-vector modulation (SVM) to generate the digital PWM signals to drive the Power MOSFET switches of the inverter.

There are two other versions of this design. The first, "PMSM Motor And Ideal Drive", uses continuous Clarke and Park Transform models and an ideal voltage drive to represent the main features of the field-oriented control system., Another version, "PMSM Motor and PWM Drive", it similar to this version but uses ideal switches.

This version is the most detailed and therefore simulated the most slowly. It is well suited for understanding the performance of the Power MOSFETs in the context of the system, In the waveform plot on the right, the actual motor shaft angle (orange waveform) and the A-phase current (dark blue waveform) are shown. These are very similar to the results for the other two versions of the design. But the waveform plot on the left provides insight into the performance of the C-phase inverter pull-up switch. The MOSFET current Ids (green waveform), and the average power dissipated in the device (red waveform) are shown. This design can be used to size specific parts in the drive electronics, by comparing the operating conditions to which they are exposed, relative to their rated operational limits.

About text formats

PMSM Motor and ideal PWM_HighestPerformance

MASA
Designer208

MASA

Member for

9 years 8 months

579

designs

8

groups

Description

Permanent Magnet Synchronous Machine (PMSM) and PWM Drive circuit, with mechanical load. The drive includes a D-Q control algorithm, and uses space-vector modulation (SVM) to generate the digital PWM signals to drive the Power MOSFET switches of the inverter.

There are two other versions of this design. The first, "PMSM Motor And Ideal Drive", uses continuous Clarke and Park Transform models and an ideal voltage drive to represent the main features of the field-oriented control system., Another version, "PMSM Motor and PWM Drive", it similar to this version but uses ideal switches.

This version is the most detailed and therefore simulated the most slowly. It is well suited for understanding the performance of the Power MOSFETs in the context of the system, In the waveform plot on the right, the actual motor shaft angle (orange waveform) and the A-phase current (dark blue waveform) are shown. These are very similar to the results for the other two versions of the design. But the waveform plot on the left provides insight into the performance of the C-phase inverter pull-up switch. The MOSFET current Ids (green waveform), and the average power dissipated in the device (red waveform) are shown. This design can be used to size specific parts in the drive electronics, by comparing the operating conditions to which they are exposed, relative to their rated operational limits.

About text formats

Copy of Electric Power Steering System with Ideal PMSM and Drive - on Sat, 05/09/2020 - 23:33

mbiagio
Designer231713

mbiagio

Member for

4 years 6 months

8

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This design includes an ideal Permanent Magnet Synchronous Machine (PMSM) model, as well as a continuous D-Q controller and drive circuit. The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, a non-linear gain profile is specified in the "torque_assist_table" function, and a lead-lag compensator is used to improve system stability.

Note that this is a "tunable" design. Many of these system parameters can be changed by the user. Then a new simulation can be run and the updated results can be observed in the waveform viewers.

In a companion versions of this design, "EPS System with MotorSolve Generated PMSM Model and Ideal Drive", the ideal PMSM is replaced with a more realistic motor model generated by MotorSolve, the motor design tool. That model includes cogging torque, saturation and torque ripple behavior, which is seen to have a significant effect in this power steering application.

A second companion design, "EPS System with MotorSolve Generated PMSM Model and DQ/SVM Drive", uses both the MotorSolve motor model and also a sampled-data D-Q control algorithm and space-vector modulation (SVM) to control the switches in a power electronics circuit. This shows the ability to develop motor control and drives at the abstract level and also at the circuit level.

About text formats

Copy of Electric Power Steering System with Ideal PMSM and Drive - on Sat, 05/09/2020 - 23:32

mbiagio
Designer231713

mbiagio

Member for

4 years 6 months

8

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This design includes an ideal Permanent Magnet Synchronous Machine (PMSM) model, as well as a continuous D-Q controller and drive circuit. The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, a non-linear gain profile is specified in the "torque_assist_table" function, and a lead-lag compensator is used to improve system stability.

Note that this is a "tunable" design. Many of these system parameters can be changed by the user. Then a new simulation can be run and the updated results can be observed in the waveform viewers.

In a companion versions of this design, "EPS System with MotorSolve Generated PMSM Model and Ideal Drive", the ideal PMSM is replaced with a more realistic motor model generated by MotorSolve, the motor design tool. That model includes cogging torque, saturation and torque ripple behavior, which is seen to have a significant effect in this power steering application.

A second companion design, "EPS System with MotorSolve Generated PMSM Model and DQ/SVM Drive", uses both the MotorSolve motor model and also a sampled-data D-Q control algorithm and space-vector modulation (SVM) to control the switches in a power electronics circuit. This shows the ability to develop motor control and drives at the abstract level and also at the circuit level.

About text formats

Copy of PMSM Motor and Ideal Drive - on Mon, 05/04/2020 - 11:20

jcsousa.gm
Designer230339

jcsousa.gm

Member for

4 years 7 months

70

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

About text formats

Copy of Electric Power Steering System with Ideal PMSM and Drive

Weidong
Designer219839

Weidong

Member for

5 years 4 months

14

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This design includes an ideal Permanent Magnet Synchronous Machine (PMSM) model, as well as a continuous D-Q controller and drive circuit. The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, a non-linear gain profile is specified in the "torque_assist_table" function, and a lead-lag compensator is used to improve system stability.

Note that this is a "tunable" design. Many of these system parameters can be changed by the user. Then a new simulation can be run and the updated results can be observed in the waveform viewers.

In a companion versions of this design, "EPS System with MotorSolve Generated PMSM Model and Ideal Drive", the ideal PMSM is replaced with a more realistic motor model generated by MotorSolve, the motor design tool. That model includes cogging torque, saturation and torque ripple behavior, which is seen to have a significant effect in this power steering application.

A second companion design, "EPS System with MotorSolve Generated PMSM Model and DQ/SVM Drive", uses both the MotorSolve motor model and also a sampled-data D-Q control algorithm and space-vector modulation (SVM) to control the switches in a power electronics circuit. This shows the ability to develop motor control and drives at the abstract level and also at the circuit level.

About text formats

Copy of Electric Power Steering System with Ideal PMSM and Drive - on Sat, 04/25/2020 - 11:22

Nida
Designer205946

Nida

Member for

6 years

1

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This design includes an ideal Permanent Magnet Synchronous Machine (PMSM) model, as well as a continuous D-Q controller and drive circuit. The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, a non-linear gain profile is specified in the "torque_assist_table" function, and a lead-lag compensator is used to improve system stability.

Note that this is a "tunable" design. Many of these system parameters can be changed by the user. Then a new simulation can be run and the updated results can be observed in the waveform viewers.

In a companion versions of this design, "EPS System with MotorSolve Generated PMSM Model and Ideal Drive", the ideal PMSM is replaced with a more realistic motor model generated by MotorSolve, the motor design tool. That model includes cogging torque, saturation and torque ripple behavior, which is seen to have a significant effect in this power steering application.

A second companion design, "EPS System with MotorSolve Generated PMSM Model and DQ/SVM Drive", uses both the MotorSolve motor model and also a sampled-data D-Q control algorithm and space-vector modulation (SVM) to control the switches in a power electronics circuit. This shows the ability to develop motor control and drives at the abstract level and also at the circuit level.

About text formats

Terms of Use Cookie Notice Data Privacy Notice

richard.leDesigner231974

Member for

richard.leDesigner231974

Member for

MASADesigner208

Member for

MASADesigner208

Member for

MASADesigner208

Member for

mbiagioDesigner231713

Member for

mbiagioDesigner231713

Member for

jcsousa.gmDesigner230339

Member for

WeidongDesigner219839

Member for

NidaDesigner205946

Member for

richard.le
Designer231974

richard.le
Designer231974

MASA
Designer208

MASA
Designer208

MASA
Designer208

mbiagio
Designer231713

mbiagio
Designer231713

jcsousa.gm
Designer230339

Weidong
Designer219839

Nida
Designer205946