PMSM | PartQuest™ Explore

Application Area

Motors & Drives

Electric Power Steering System with Ideal PMSM and Drive

Mike Donnelly
Designer19

Mike Donnelly

Member for

10 years 10 months

1,652

designs

10

groups

Member of the PartQuest Explore Development Team. Focused on modeling and simulation of analog, mixed-signal and multi-discipline systems covering a broad range of applications, including power electronics, controls and mechatronic systems.

Description

This design includes an ideal Permanent Magnet Synchronous Machine (PMSM) model, as well as a continuous D-Q controller and drive circuit. The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, a non-linear gain profile is specified in the "torque_assist_table" function, and a lead compensator is used to improve system stability.

Note that this is a "tunable" design. Many of these system parameters can be changed by the user. Then a new simulation can be run and the updated results can be observed in the waveform viewers.

In a companion versions of this design, "EPS System with MotorSolve Generated PMSM Model and Ideal Drive", the ideal PMSM is replaced with a more realistic motor model generated by MotorSolve, the motor design tool. That model includes cogging torque, saturation and torque ripple behavior, which is seen to have a significant effect in this power steering application.

A second companion design, "EPS System with MotorSolve Generated PMSM Model and DQ/SVM Drive", uses both the MotorSolve motor model and also a sampled-data D-Q control algorithm and space-vector modulation (SVM) to control the switches in a power electronics circuit. This shows the ability to develop motor control and drives at the abstract level and also at the circuit level.

About text formats

Copy of Cond Losses verify PMSM 7R8 - V2 - on Wed, 09/18/2024 - 14:49

User-1726694208
Designer258519

User-1726694208

Member for

4 hours 54 minutes

1

designs

1

groups

Welcome to the community!!

Copy of Electric Power Steering System with Ideal PMSM and Drive - on Wed, 09/18/2024 - 12:18

Designer0

Member for

4 years 8 months

0

designs

0

groups

Description

This design includes an ideal Permanent Magnet Synchronous Machine (PMSM) model, as well as a continuous D-Q controller and drive circuit. The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, a non-linear gain profile is specified in the "torque_assist_table" function, and a lead compensator is used to improve system stability.

Note that this is a "tunable" design. Many of these system parameters can be changed by the user. Then a new simulation can be run and the updated results can be observed in the waveform viewers.

In a companion versions of this design, "EPS System with MotorSolve Generated PMSM Model and Ideal Drive", the ideal PMSM is replaced with a more realistic motor model generated by MotorSolve, the motor design tool. That model includes cogging torque, saturation and torque ripple behavior, which is seen to have a significant effect in this power steering application.

A second companion design, "EPS System with MotorSolve Generated PMSM Model and DQ/SVM Drive", uses both the MotorSolve motor model and also a sampled-data D-Q control algorithm and space-vector modulation (SVM) to control the switches in a power electronics circuit. This shows the ability to develop motor control and drives at the abstract level and also at the circuit level.

About text formats

Copy of Electric Power Steering System with Ideal PMSM and Drive - on Wed, 09/18/2024 - 14:11

Designer0

Member for

4 years 8 months

0

designs

0

groups

Description

This design includes an ideal Permanent Magnet Synchronous Machine (PMSM) model, as well as a continuous D-Q controller and drive circuit. The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, a non-linear gain profile is specified in the "torque_assist_table" function, and a lead compensator is used to improve system stability.

Note that this is a "tunable" design. Many of these system parameters can be changed by the user. Then a new simulation can be run and the updated results can be observed in the waveform viewers.

In a companion versions of this design, "EPS System with MotorSolve Generated PMSM Model and Ideal Drive", the ideal PMSM is replaced with a more realistic motor model generated by MotorSolve, the motor design tool. That model includes cogging torque, saturation and torque ripple behavior, which is seen to have a significant effect in this power steering application.

A second companion design, "EPS System with MotorSolve Generated PMSM Model and DQ/SVM Drive", uses both the MotorSolve motor model and also a sampled-data D-Q control algorithm and space-vector modulation (SVM) to control the switches in a power electronics circuit. This shows the ability to develop motor control and drives at the abstract level and also at the circuit level.

About text formats

Copy of PMSM Motor and PWM NMOS Drive - on Fri, 09/13/2024 - 11:36

User-1705420828
Designer253226

User-1705420828

Member for

8 months

7

designs

1

groups

Welcome to the community!!

Description

Permanent Magnet Synchronous Machine (PMSM) and PWM Drive circuit, with mechanical load. The drive includes a D-Q control algorithm, and uses space-vector modulation (SVM) to generate the digital PWM signals to drive the Power MOSFET switches of the inverter.

There are two other versions of this design. The first, "PMSM Motor And Ideal Drive", uses continuous Clarke and Park Transform models and an ideal voltage drive to represent the main features of the field-oriented control system., Another version, "PMSM Motor and PWM Drive", it similar to this version but uses ideal switches.

This version is the most detailed and therefore simulated the most slowly. It is well suited for understanding the performance of the Power MOSFETs in the context of the system, In the waveform plot on the right, the actual motor shaft angle (orange waveform) and the A-phase current (dark blue waveform) are shown. These are very similar to the results for the other two versions of the design. But the waveform plot on the left provides insight into the performance of the C-phase inverter pull-up switch. The MOSFET current Ids (green waveform), and the average power dissipated in the device (red waveform) are shown. This design can be used to size specific parts in the drive electronics, by comparing the operating conditions to which they are exposed, relative to their rated operational limits.

About text formats

Copy of PMSM Motor and PWM NMOS Drive - on Fri, 09/13/2024 - 11:35

User-1705420828
Designer253226

User-1705420828

Member for

8 months

7

designs

1

groups

Welcome to the community!!

Description

Permanent Magnet Synchronous Machine (PMSM) and PWM Drive circuit, with mechanical load. The drive includes a D-Q control algorithm, and uses space-vector modulation (SVM) to generate the digital PWM signals to drive the Power MOSFET switches of the inverter.

There are two other versions of this design. The first, "PMSM Motor And Ideal Drive", uses continuous Clarke and Park Transform models and an ideal voltage drive to represent the main features of the field-oriented control system., Another version, "PMSM Motor and PWM Drive", it similar to this version but uses ideal switches.

This version is the most detailed and therefore simulated the most slowly. It is well suited for understanding the performance of the Power MOSFETs in the context of the system, In the waveform plot on the right, the actual motor shaft angle (orange waveform) and the A-phase current (dark blue waveform) are shown. These are very similar to the results for the other two versions of the design. But the waveform plot on the left provides insight into the performance of the C-phase inverter pull-up switch. The MOSFET current Ids (green waveform), and the average power dissipated in the device (red waveform) are shown. This design can be used to size specific parts in the drive electronics, by comparing the operating conditions to which they are exposed, relative to their rated operational limits.

About text formats

Copy of Electric Power Steering System with Ideal PMSM and Drive - on Fri, 09/13/2024 - 09:32

Designer0

Member for

4 years 8 months

0

designs

0

groups

Description

This design includes an ideal Permanent Magnet Synchronous Machine (PMSM) model, as well as a continuous D-Q controller and drive circuit. The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, a non-linear gain profile is specified in the "torque_assist_table" function, and a lead compensator is used to improve system stability.

Note that this is a "tunable" design. Many of these system parameters can be changed by the user. Then a new simulation can be run and the updated results can be observed in the waveform viewers.

In a companion versions of this design, "EPS System with MotorSolve Generated PMSM Model and Ideal Drive", the ideal PMSM is replaced with a more realistic motor model generated by MotorSolve, the motor design tool. That model includes cogging torque, saturation and torque ripple behavior, which is seen to have a significant effect in this power steering application.

A second companion design, "EPS System with MotorSolve Generated PMSM Model and DQ/SVM Drive", uses both the MotorSolve motor model and also a sampled-data D-Q control algorithm and space-vector modulation (SVM) to control the switches in a power electronics circuit. This shows the ability to develop motor control and drives at the abstract level and also at the circuit level.

About text formats

Copy of PMSM Motor and PWM NMOS Drive - on Mon, 09/09/2024 - 12:27

User-1705420828
Designer253226

User-1705420828

Member for

8 months

7

designs

1

groups

Welcome to the community!!

Description

Permanent Magnet Synchronous Machine (PMSM) and PWM Drive circuit, with mechanical load. The drive includes a D-Q control algorithm, and uses space-vector modulation (SVM) to generate the digital PWM signals to drive the Power MOSFET switches of the inverter.

There are two other versions of this design. The first, "PMSM Motor And Ideal Drive", uses continuous Clarke and Park Transform models and an ideal voltage drive to represent the main features of the field-oriented control system., Another version, "PMSM Motor and PWM Drive", it similar to this version but uses ideal switches.

This version is the most detailed and therefore simulated the most slowly. It is well suited for understanding the performance of the Power MOSFETs in the context of the system, In the waveform plot on the right, the actual motor shaft angle (orange waveform) and the A-phase current (dark blue waveform) are shown. These are very similar to the results for the other two versions of the design. But the waveform plot on the left provides insight into the performance of the C-phase inverter pull-up switch. The MOSFET current Ids (green waveform), and the average power dissipated in the device (red waveform) are shown. This design can be used to size specific parts in the drive electronics, by comparing the operating conditions to which they are exposed, relative to their rated operational limits.

About text formats

Copy of Electric Power Steering System with Ideal PMSM and Drive - on Fri, 08/30/2024 - 07:12

Designer0

Member for

4 years 8 months

0

designs

0

groups

Description

This design includes an ideal Permanent Magnet Synchronous Machine (PMSM) model, as well as a continuous D-Q controller and drive circuit. The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, a non-linear gain profile is specified in the "torque_assist_table" function, and a lead compensator is used to improve system stability.

Note that this is a "tunable" design. Many of these system parameters can be changed by the user. Then a new simulation can be run and the updated results can be observed in the waveform viewers.

In a companion versions of this design, "EPS System with MotorSolve Generated PMSM Model and Ideal Drive", the ideal PMSM is replaced with a more realistic motor model generated by MotorSolve, the motor design tool. That model includes cogging torque, saturation and torque ripple behavior, which is seen to have a significant effect in this power steering application.

A second companion design, "EPS System with MotorSolve Generated PMSM Model and DQ/SVM Drive", uses both the MotorSolve motor model and also a sampled-data D-Q control algorithm and space-vector modulation (SVM) to control the switches in a power electronics circuit. This shows the ability to develop motor control and drives at the abstract level and also at the circuit level.

About text formats

Copy of PMSM Motor and PWM NMOS Drive - on Tue, 08/20/2024 - 15:36

User-1705420828
Designer253226

User-1705420828

Member for

8 months

7

designs

1

groups

Welcome to the community!!

Description

Permanent Magnet Synchronous Machine (PMSM) and PWM Drive circuit, with mechanical load. The drive includes a D-Q control algorithm, and uses space-vector modulation (SVM) to generate the digital PWM signals to drive the Power MOSFET switches of the inverter.

There are two other versions of this design. The first, "PMSM Motor And Ideal Drive", uses continuous Clarke and Park Transform models and an ideal voltage drive to represent the main features of the field-oriented control system., Another version, "PMSM Motor and PWM Drive", it similar to this version but uses ideal switches.

This version is the most detailed and therefore simulated the most slowly. It is well suited for understanding the performance of the Power MOSFETs in the context of the system, In the waveform plot on the right, the actual motor shaft angle (orange waveform) and the A-phase current (dark blue waveform) are shown. These are very similar to the results for the other two versions of the design. But the waveform plot on the left provides insight into the performance of the C-phase inverter pull-up switch. The MOSFET current Ids (green waveform), and the average power dissipated in the device (red waveform) are shown. This design can be used to size specific parts in the drive electronics, by comparing the operating conditions to which they are exposed, relative to their rated operational limits.

About text formats

Terms of Use Cookie Notice Data Privacy Notice

Mike DonnellyDesigner19

Member for

User-1726694208Designer258519

Member for

Designer0

Member for

Designer0

Member for

User-1705420828Designer253226

Member for

User-1705420828Designer253226

Member for

Designer0

Member for

User-1705420828Designer253226

Member for

Designer0

Member for

User-1705420828Designer253226

Member for

Mike Donnelly
Designer19

User-1726694208
Designer258519

User-1705420828
Designer253226

User-1705420828
Designer253226

User-1705420828
Designer253226

User-1705420828
Designer253226