AC-DC Converter | PartQuest™ Explore

Application Area

Power Electronics

Power Electronics

Bridge Rectifier

Darrell
Designer10

Darrell

Member for

11 years

designs

groups

Big fan of VHDL-AMS

AC-DC Power Adapter

Darrell
Designer10

Darrell

Member for

11 years

designs

groups

Big fan of VHDL-AMS

Description

<p>This is a circuit design for a typical wall-plug power adapter.</p>

<p>The sinusoidal source represents a typical US 60 Hz, 120V AC wall supply.</p>

<p>A transformer steps the voltage down to a manageable range to be rectified for a 5V DC supply, but the waveform is still sinusoidal.</p>

<p>The 4 diode bridge rectifier takes this lower amplitude sinusoidal signal and produces a DC biased result, but still with noise resulting from the rectification process.</p>

<p>The capacitor before the voltage regulator chip helps smooth some of this noise. Then the regulator chip provides a self-contained, feedback controlled mechanism to keep the output voltage at the specified value.</p>

<p>The output capacitor further smooths any output ripple and provides a reservoir of charge to supply any surge in current load that may be encountered.</p>

<p>This example includes a load resistor that allows the exploration of the effects of load. The load is varied during the simulation and it can be seen that above a load of 100 mA, the regulation of the output voltage begins to deteriorate.</p>

<p>The addition of a few components can make it possible for such a circuit to provide significantly higher power loads. See http://www.systemvision.com/design/ac-dc-power-adapter-current-boost-regulator for an example.</p>

About text formats

Copy of AC-DC Power Adapter - on Tue, 11/05/2024 - 14:39

Designer0

PartQuest Explore

Member for

4 years 10 months

designs

groups

Description

<p>This is a circuit design for a typical wall-plug power adapter.</p>

<p>The sinusoidal source represents a typical US 60 Hz, 120V AC wall supply.</p>

<p>A transformer steps the voltage down to a manageable range to be rectified for a 5V DC supply, but the waveform is still sinusoidal.</p>

<p>The 4 diode bridge rectifier takes this lower amplitude sinusoidal signal and produces a DC biased result, but still with noise resulting from the rectification process.</p>

<p>The capacitor before the voltage regulator chip helps smooth some of this noise. Then the regulator chip provides a self-contained, feedback controlled mechanism to keep the output voltage at the specified value.</p>

<p>The output capacitor further smooths any output ripple and provides a reservoir of charge to supply any surge in current load that may be encountered.</p>

<p>This example includes a load resistor that allows the exploration of the effects of load. The load is varied during the simulation and it can be seen that above a load of 100 mA, the regulation of the output voltage begins to deteriorate.</p>

<p>The addition of a few components can make it possible for such a circuit to provide significantly higher power loads. See http://www.systemvision.com/design/ac-dc-power-adapter-current-boost-regulator for an example.</p>

About text formats

Copy of AC-DC Power Adapter - on Sun, 11/03/2024 - 23:50

Designer0

PartQuest Explore

Member for

4 years 10 months

designs

groups

Description

<p>This is a circuit design for a typical wall-plug power adapter.</p>

<p>The sinusoidal source represents a typical US 60 Hz, 120V AC wall supply.</p>

<p>A transformer steps the voltage down to a manageable range to be rectified for a 5V DC supply, but the waveform is still sinusoidal.</p>

<p>The 4 diode bridge rectifier takes this lower amplitude sinusoidal signal and produces a DC biased result, but still with noise resulting from the rectification process.</p>

<p>The capacitor before the voltage regulator chip helps smooth some of this noise. Then the regulator chip provides a self-contained, feedback controlled mechanism to keep the output voltage at the specified value.</p>

<p>The output capacitor further smooths any output ripple and provides a reservoir of charge to supply any surge in current load that may be encountered.</p>

<p>This example includes a load resistor that allows the exploration of the effects of load. The load is varied during the simulation and it can be seen that above a load of 100 mA, the regulation of the output voltage begins to deteriorate.</p>

<p>The addition of a few components can make it possible for such a circuit to provide significantly higher power loads. See http://www.systemvision.com/design/ac-dc-power-adapter-current-boost-regulator for an example.</p>

About text formats

Copy of AC-DC Power Adapter - on Thu, 05/16/2024 - 15:59

Designer0

PartQuest Explore

Member for

4 years 10 months

designs

groups

Description

<p>This is a circuit design for a typical wall-plug power adapter.</p>

<p>The sinusoidal source represents a typical US 60 Hz, 120V AC wall supply.</p>

<p>A transformer steps the voltage down to a manageable range to be rectified for a 5V DC supply, but the waveform is still sinusoidal.</p>

<p>The 4 diode bridge rectifier takes this lower amplitude sinusoidal signal and produces a DC biased result, but still with noise resulting from the rectification process.</p>

<p>The capacitor before the voltage regulator chip helps smooth some of this noise. Then the regulator chip provides a self-contained, feedback controlled mechanism to keep the output voltage at the specified value.</p>

<p>The output capacitor further smooths any output ripple and provides a reservoir of charge to supply any surge in current load that may be encountered.</p>

<p>This example includes a load resistor that allows the exploration of the effects of load. The load is varied during the simulation and it can be seen that above a load of 100 mA, the regulation of the output voltage begins to deteriorate.</p>

<p>The addition of a few components can make it possible for such a circuit to provide significantly higher power loads. See http://www.systemvision.com/design/ac-dc-power-adapter-current-boost-regulator for an example.</p>

About text formats

Tarea robert

Mauro DanielM.PQ-856
Designer245587

PartQuest Explore

Mauro DanielM.PQ-856

Member for

1 year 9 months

designs

groups

I'm a member of the PartQuest Explore community.

Copy of tarea 2.1 - on Wed, 03/06/2024 - 16:03

User-1706825798
Designer253659

PartQuest Explore

User-1706825798

Member for

9 months 2 weeks

designs

groups

Welcome to the community!!

Copy of tarea 2.1 - on Wed, 03/06/2024 - 15:59

User-1706825798
Designer253659

PartQuest Explore

User-1706825798

Member for

9 months 2 weeks

designs

groups

Welcome to the community!!

Copy of tarea 2.1 - on Tue, 03/05/2024 - 19:44

User-1706825798
Designer253659

PartQuest Explore

User-1706825798

Member for

9 months 2 weeks

designs

groups

Welcome to the community!!

Copy of tarea 2.1 - on Tue, 03/05/2024 - 19:42

User-1706825798
Designer253659

PartQuest Explore

User-1706825798

Member for

9 months 2 weeks

designs

groups

Welcome to the community!!