Designer19 × 0 designs 10 groups Member of the PartQuest Explore Development Team. Focused on modeling and simulation of analog, mixed-signal and multi-discipline systems covering a broad range of applications, including power electronics, controls and mechatronic systems. https://explore.partquest.com/node/278503 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/278503"></iframe> Title Description <p>This test circuit shows how the programmable features of the NCV78703 can be changed dynamically during the simulation run:</p><p>Test 1: Between 0.9 ms and 1.1 ms, the boost voltage setpoint is changed from 95 to 102, and the corresponding change in the output voltage can be seen (both are visible in the upper left waveform viewer).</p><p>Test 2: Between 1.3 ms and 1.5 ms, the boost3 phase is disabled (light blue waveform in the lower right), and the corresponding current drop-out is shown in the green waveform.</p><p>Test 3: Between 1.6 ms and 1.8 ms, the boost3 phase is again disabled, but this time by setting the analog "enable3" pin to 0.0V, with similar drop-out observed in the green phase3 current waveform.</p><p>Note that in both Tests 2 and 3, the current in phase 1 (brown waveform) increases to compensate during the phase 3 drop-out events. Phase 2 has a similar response, just move the "Live" waveform probe to see it.</p> About text formats Tags Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
