Designer19 × 0 designs 10 groups Member of the PartQuest Explore Development Team. Focused on modeling and simulation of analog, mixed-signal and multi-discipline systems covering a broad range of applications, including power electronics, controls and mechatronic systems. https://explore.partquest.com/node/269320 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/269320"></iframe> Title Description <p>Live Application Example of the NCV84160 High Side Protected FET used as a Solenoid Driver.</p><p>This design illustrates two important features of the NCV84160:</p><p>1) Active clamping (at approximately -35V) for inductive load turn-off</p><p>2) Current sense output (proportional to the actual load current being supplied)</p><p>This is a "Live" design. That means you can change important system design parameters, including the battery voltage and the current sense resistor value, as well as key electrical characteristics of the solenoid. After making a change, just push the green "Play" arrow and a new simulation will be run ... after a short time, you'll see its effect on the system response. For example, if you change the stroke to 5m (meters) and t_response to 10m (seconds), to model a larger and heavier solenoid, this will significantly alter the current sense (v_cs) "signature" coming from the NCV84160.</p> About text formats Tags solenoidNCV84160Motion Control Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
