Copy of Torque-Speed evaluation of Stepper motor (ramped torque) - on Mon, 07/24/2023 - 11:02 Designer https://explore.partquest.com/node/601824 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/601824"></iframe> Title Description <p>Torque-Speed characteristics of a stepper motor are evaluated using an adjustable friction brake, maintaiining D_VISCOUS at minimum possible or cero, adjusting TORQ_FRIC_KINETIC to apply mechanical load to the motor. TORQ-FRIC-STATIC must always be greater than the kinetic one to avoid simulation problems.</p> <p>Step frequency must be adjusted too, starting with low frequency the mechanical friction must be increased until the motor loses steps, thus obtaining the first T-n point.</p> <p>The same procedure must be done for greater pulse frequescies.</p> <p>The 2 H-bridges are supossed to simulate a simple driver like the L298N (based on an example available on the page)</p> <p>Motor data is based on NanotecST4118S1404-B.</p> About text formats Tags stepper motorTorqueSpeedDynamometer Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
Copy of Torque-Speed evaluation of Stepper motor (stepped torque) - on Sun, 12/20/2020 - 21:46 Designer https://explore.partquest.com/node/396278 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/396278"></iframe> Title Description <p>Torque-Speed characteristics of a stepper motor are evaluated using an adjustable friction brake, maintaiining D_VISCOUS at minimum possible or cero, adjusting TORQ_FRIC_KINETIC to apply mechanical load to the motor. TORQ-FRIC-STATIC must always be greater than the kinetic one to avoid simulation problems.</p> <p>Step frequency must be adjusted too, starting with low frequency the mechanical friction must be increased until the motor loses steps, thus obtaining the first T-n point.</p> <p>The same procedure must be done for greater pulse frequescies.</p> <p>The 2 H-bridges are supossed to simulate a simple driver like the L298N (based on an example available on the page)</p> <p>Motor data is based on NanotecST4118S1404-B.</p> About text formats Tags stepper motorTorqueSpeedDynamometer Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
P9final Designer https://explore.partquest.com/node/335186 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/335186"></iframe> Title Description <p>Torque-Speed characteristics of a stepper motor are evaluated using an adjustable friction brake, maintaiining D_VISCOUS at minimum possible or cero, adjusting TORQ_FRIC_KINETIC to apply mechanical load to the motor. TORQ-FRIC-STATIC must always be greater than the kinetic one to avoid simulation problems.</p> <p>Step frequency must be adjusted too, starting with low frequency the mechanical friction must be increased until the motor loses steps, thus obtaining the first T-n point.</p> <p>The same procedure must be done for greater pulse frequescies.</p> <p>The 2 H-bridges are supossed to simulate a simple driver like the L298N (based on an example available on the page)</p> <p>Motor data is based on NanotecST4118S1404-B.</p> About text formats Tags stepper motorTorqueSpeedDynamometer Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
PRACTICA9_B CORRECTA Designer https://explore.partquest.com/node/334783 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/334783"></iframe> Title Description <p>Torque-Speed characteristics of a stepper motor are evaluated using an adjustable friction brake, maintaiining D_VISCOUS at minimum possible or cero, adjusting TORQ_FRIC_KINETIC to apply mechanical load to the motor. TORQ-FRIC-STATIC must always be greater than the kinetic one to avoid simulation problems.</p> <p>Step frequency must be adjusted too, starting with low frequency the mechanical friction must be increased until the motor loses steps, thus obtaining the first T-n point.</p> <p>The same procedure must be done for greater pulse frequescies.</p> <p>The 2 H-bridges are supossed to simulate a simple driver like the L298N (based on an example available on the page)</p> <p>Motor data is based on NanotecST4118S1404-B.</p> About text formats Tags stepper motorTorqueSpeedDynamometer Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
PRACTICA9 CORRECTA Designer https://explore.partquest.com/node/334782 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/334782"></iframe> Title Description <p>Torque-Speed characteristics of a stepper motor are evaluated using an adjustable friction brake, maintaiining D_VISCOUS at minimum possible or cero, adjusting TORQ_FRIC_KINETIC to apply mechanical load to the motor. TORQ-FRIC-STATIC must always be greater than the kinetic one to avoid simulation problems.</p> <p>Step frequency must be adjusted too, starting with low frequency the mechanical friction must be increased until the motor loses steps, thus obtaining the first T-n point.</p> <p>The same procedure must be done for greater pulse frequescies.</p> <p>The 2 H-bridges are supossed to simulate a simple driver like the L298N (based on an example available on the page)</p> <p>Motor data is based on NanotecST4118S1404-B.</p> About text formats Tags stepper motorTorqueSpeedDynamometer Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
prueba Designer https://explore.partquest.com/node/334780 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/334780"></iframe> Title Description <p>Torque-Speed characteristics of a stepper motor are evaluated using an adjustable friction brake, maintaiining D_VISCOUS at minimum possible or cero, adjusting TORQ_FRIC_KINETIC to apply mechanical load to the motor. TORQ-FRIC-STATIC must always be greater than the kinetic one to avoid simulation problems.</p> <p>Step frequency must be adjusted too, starting with low frequency the mechanical friction must be increased until the motor loses steps, thus obtaining the first T-n point.</p> <p>The same procedure must be done for greater pulse frequescies.</p> <p>The 2 H-bridges are supossed to simulate a simple driver like the L298N (based on an example available on the page)</p> <p>Motor data is based on NanotecST4118S1404-B.</p> About text formats Tags stepper motorTorqueSpeedDynamometer Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
P103_S9_ParteA_LaraPazmiñoDavid Designer https://explore.partquest.com/node/334685 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/334685"></iframe> Title Description <p>Torque-Speed characteristics of a stepper motor are evaluated using an adjustable friction brake, maintaiining D_VISCOUS at minimum possible or cero, adjusting TORQ_FRIC_KINETIC to apply mechanical load to the motor. TORQ-FRIC-STATIC must always be greater than the kinetic one to avoid simulation problems.</p> <p>Step frequency must be adjusted too, starting with low frequency the mechanical friction must be increased until the motor loses steps, thus obtaining the first T-n point.</p> <p>The same procedure must be done for greater pulse frequescies.</p> <p>The 2 H-bridges are supossed to simulate a simple driver like the L298N (based on an example available on the page)</p> <p>Motor data is based on NanotecST4118S1404-B.</p> About text formats Tags stepper motorTorqueSpeedDynamometer Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
P103_S9_ParteB_LaraPazmiñoDavid Designer https://explore.partquest.com/node/334377 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/334377"></iframe> Title Description <p>Torque-Speed characteristics of a stepper motor are evaluated using an adjustable friction brake, maintaiining D_VISCOUS at minimum possible or cero, adjusting TORQ_FRIC_KINETIC to apply mechanical load to the motor. TORQ-FRIC-STATIC must always be greater than the kinetic one to avoid simulation problems.</p> <p>Step frequency must be adjusted too, starting with low frequency the mechanical friction must be increased until the motor loses steps, thus obtaining the first T-n point.</p> <p>The same procedure must be done for greater pulse frequescies.</p> <p>The 2 H-bridges are supossed to simulate a simple driver like the L298N (based on an example available on the page)</p> <p>Motor data is based on NanotecST4118S1404-B.</p> About text formats Tags stepper motorTorqueSpeedDynamometer Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
Practica 9-2 - Carlos Cardenas Designer https://explore.partquest.com/node/334369 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/334369"></iframe> Title Description <p>Torque-Speed characteristics of a stepper motor are evaluated using an adjustable friction brake, maintaiining D_VISCOUS at minimum possible or cero, adjusting TORQ_FRIC_KINETIC to apply mechanical load to the motor. TORQ-FRIC-STATIC must always be greater than the kinetic one to avoid simulation problems.</p> <p>Step frequency must be adjusted too, starting with low frequency the mechanical friction must be increased until the motor loses steps, thus obtaining the first T-n point.</p> <p>The same procedure must be done for greater pulse frequescies.</p> <p>The 2 H-bridges are supossed to simulate a simple driver like the L298N (based on an example available on the page)</p> <p>Motor data is based on NanotecST4118S1404-B.</p> About text formats Tags stepper motorTorqueSpeedDynamometer Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
P103_S9-2_Lara_Pazmiño_David Designer https://explore.partquest.com/node/331429 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/331429"></iframe> Title Description <p>Torque-Speed characteristics of a stepper motor are evaluated using an adjustable friction brake, maintaiining D_VISCOUS at minimum possible or cero, adjusting TORQ_FRIC_KINETIC to apply mechanical load to the motor. TORQ-FRIC-STATIC must always be greater than the kinetic one to avoid simulation problems.</p> <p>Step frequency must be adjusted too, starting with low frequency the mechanical friction must be increased until the motor loses steps, thus obtaining the first T-n point.</p> <p>The same procedure must be done for greater pulse frequescies.</p> <p>The 2 H-bridges are supossed to simulate a simple driver like the L298N (based on an example available on the page)</p> <p>Motor data is based on NanotecST4118S1404-B.</p> About text formats Tags stepper motorTorqueSpeedDynamometer Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -