Power | PartQuest™ Explore

Copy of AC-DC Power Adapter - on Thu, 04/23/2020 - 21:49

roger.morales.alfaro
Designer231351

PartQuest Explore

roger.morales.alfaro

Member for

4 years 7 months

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

<p>This is a circuit design for a typical wall-plug power adapter.</p>

<p>The sinusoidal source represents a typical US 60 Hz, 120V AC wall supply.</p>

<p>A transformer steps the voltage down to a manageable range to be rectified for a 5V DC supply, but the waveform is still sinusoidal.</p>

<p>The 4 diode bridge rectifier takes this lower amplitude sinusoidal signal and produces a DC biased result, but still with noise resulting from the rectification process.</p>

<p>The capacitor before the voltage regulator chip helps smooth some of this noise. Then the regulator chip provides a self-contained, feedback controlled mechanism to keep the output voltage at the specified value.</p>

<p>The output capacitor further smooths any output ripple and provides a reservoir of charge to supply any surge in current load that may be encountered.</p>

<p>This example includes a load resistor that allows the exploration of the effects of load. The load is varied during the simulation and it can be seen that above a load of 100 mA, the regulation of the output voltage begins to deteriorate.</p>

<p>The addition of a few components can make it possible for such a circuit to provide significantly higher power loads. See http://www.systemvision.com/design/ac-dc-power-adapter-current-boost-regulator for an example.</p>

About text formats

Copy of AC-DC Power Adapter - on Wed, 04/22/2020 - 22:03

designworks1988
Designer231305

PartQuest Explore

designworks1988

Member for

4 years 8 months

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

<p>This is a circuit design for a typical wall-plug power adapter.</p>

<p>The sinusoidal source represents a typical US 60 Hz, 120V AC wall supply.</p>

<p>A transformer steps the voltage down to a manageable range to be rectified for a 5V DC supply, but the waveform is still sinusoidal.</p>

<p>The 4 diode bridge rectifier takes this lower amplitude sinusoidal signal and produces a DC biased result, but still with noise resulting from the rectification process.</p>

<p>The capacitor before the voltage regulator chip helps smooth some of this noise. Then the regulator chip provides a self-contained, feedback controlled mechanism to keep the output voltage at the specified value.</p>

<p>The output capacitor further smooths any output ripple and provides a reservoir of charge to supply any surge in current load that may be encountered.</p>

<p>This example includes a load resistor that allows the exploration of the effects of load. The load is varied during the simulation and it can be seen that above a load of 100 mA, the regulation of the output voltage begins to deteriorate.</p>

<p>The addition of a few components can make it possible for such a circuit to provide significantly higher power loads. See http://www.systemvision.com/design/ac-dc-power-adapter-current-boost-regulator for an example.</p>

About text formats

Copy of AC-DC Power Adapter - on Mon, 04/13/2020 - 18:39

eusouhumana
Designer231025

PartQuest Explore

eusouhumana

Member for

4 years 8 months

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

<p>This is a circuit design for a typical wall-plug power adapter.</p>

<p>The sinusoidal source represents a typical US 60 Hz, 120V AC wall supply.</p>

<p>A transformer steps the voltage down to a manageable range to be rectified for a 5V DC supply, but the waveform is still sinusoidal.</p>

<p>The 4 diode bridge rectifier takes this lower amplitude sinusoidal signal and produces a DC biased result, but still with noise resulting from the rectification process.</p>

<p>The capacitor before the voltage regulator chip helps smooth some of this noise. Then the regulator chip provides a self-contained, feedback controlled mechanism to keep the output voltage at the specified value.</p>

<p>The output capacitor further smooths any output ripple and provides a reservoir of charge to supply any surge in current load that may be encountered.</p>

<p>This example includes a load resistor that allows the exploration of the effects of load. The load is varied during the simulation and it can be seen that above a load of 100 mA, the regulation of the output voltage begins to deteriorate.</p>

<p>The addition of a few components can make it possible for such a circuit to provide significantly higher power loads. See http://www.systemvision.com/design/ac-dc-power-adapter-current-boost-regulator for an example.</p>

About text formats

Copy of AC-DC Power Adapter - on Tue, 04/07/2020 - 18:44

takacsg11
Designer230918

PartQuest Explore

takacsg11

Member for

4 years 8 months

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

<p>This is a circuit design for a typical wall-plug power adapter.</p>

<p>The sinusoidal source represents a typical US 60 Hz, 120V AC wall supply.</p>

<p>A transformer steps the voltage down to a manageable range to be rectified for a 5V DC supply, but the waveform is still sinusoidal.</p>

<p>The 4 diode bridge rectifier takes this lower amplitude sinusoidal signal and produces a DC biased result, but still with noise resulting from the rectification process.</p>

<p>The capacitor before the voltage regulator chip helps smooth some of this noise. Then the regulator chip provides a self-contained, feedback controlled mechanism to keep the output voltage at the specified value.</p>

<p>The output capacitor further smooths any output ripple and provides a reservoir of charge to supply any surge in current load that may be encountered.</p>

<p>This example includes a load resistor that allows the exploration of the effects of load. The load is varied during the simulation and it can be seen that above a load of 100 mA, the regulation of the output voltage begins to deteriorate.</p>

<p>The addition of a few components can make it possible for such a circuit to provide significantly higher power loads. See http://www.systemvision.com/design/ac-dc-power-adapter-current-boost-regulator for an example.</p>

About text formats

AC-DC Power Adapter

takacsg11
Designer230918

PartQuest Explore

takacsg11

Member for

4 years 8 months

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

<p>This is a circuit design for a typical wall-plug power adapter.</p>

<p>The sinusoidal source represents a typical US 60 Hz, 120V AC wall supply.</p>

<p>A transformer steps the voltage down to a manageable range to be rectified for a 5V DC supply, but the waveform is still sinusoidal.</p>

<p>The 4 diode bridge rectifier takes this lower amplitude sinusoidal signal and produces a DC biased result, but still with noise resulting from the rectification process.</p>

<p>The capacitor before the voltage regulator chip helps smooth some of this noise. Then the regulator chip provides a self-contained, feedback controlled mechanism to keep the output voltage at the specified value.</p>

<p>The output capacitor further smooths any output ripple and provides a reservoir of charge to supply any surge in current load that may be encountered.</p>

<p>This example includes a load resistor that allows the exploration of the effects of load. The load is varied during the simulation and it can be seen that above a load of 100 mA, the regulation of the output voltage begins to deteriorate.</p>

<p>The addition of a few components can make it possible for such a circuit to provide significantly higher power loads. See http://www.systemvision.com/design/ac-dc-power-adapter-current-boost-regulator for an example.</p>

About text formats

Copy of AC-DC Power Adapter - on Sun, 02/23/2020 - 13:35

pradana.sunu
Designer230968

pradana.sunu

pradana.sunu

Member for

4 years 8 months

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

<p>This is a circuit design for a typical wall-plug power adapter.</p>

<p>The sinusoidal source represents a typical US 60 Hz, 120V AC wall supply.</p>

<p>A transformer steps the voltage down to a manageable range to be rectified for a 5V DC supply, but the waveform is still sinusoidal.</p>

<p>The 4 diode bridge rectifier takes this lower amplitude sinusoidal signal and produces a DC biased result, but still with noise resulting from the rectification process.</p>

<p>The capacitor before the voltage regulator chip helps smooth some of this noise. Then the regulator chip provides a self-contained, feedback controlled mechanism to keep the output voltage at the specified value.</p>

<p>The output capacitor further smooths any output ripple and provides a reservoir of charge to supply any surge in current load that may be encountered.</p>

<p>This example includes a load resistor that allows the exploration of the effects of load. The load is varied during the simulation and it can be seen that above a load of 100 mA, the regulation of the output voltage begins to deteriorate.</p>

<p>The addition of a few components can make it possible for such a circuit to provide significantly higher power loads. See http://www.systemvision.com/design/ac-dc-power-adapter-current-boost-regulator for an example.</p>

About text formats

Copy of AC-DC Power Adapter - on Sun, 02/23/2020 - 13:35

pradana.sunu
Designer230968

pradana.sunu

pradana.sunu

Member for

4 years 8 months

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

<p>This is a circuit design for a typical wall-plug power adapter.</p>

<p>The sinusoidal source represents a typical US 60 Hz, 120V AC wall supply.</p>

<p>A transformer steps the voltage down to a manageable range to be rectified for a 5V DC supply, but the waveform is still sinusoidal.</p>

<p>The 4 diode bridge rectifier takes this lower amplitude sinusoidal signal and produces a DC biased result, but still with noise resulting from the rectification process.</p>

<p>The capacitor before the voltage regulator chip helps smooth some of this noise. Then the regulator chip provides a self-contained, feedback controlled mechanism to keep the output voltage at the specified value.</p>

<p>The output capacitor further smooths any output ripple and provides a reservoir of charge to supply any surge in current load that may be encountered.</p>

<p>This example includes a load resistor that allows the exploration of the effects of load. The load is varied during the simulation and it can be seen that above a load of 100 mA, the regulation of the output voltage begins to deteriorate.</p>

<p>The addition of a few components can make it possible for such a circuit to provide significantly higher power loads. See http://www.systemvision.com/design/ac-dc-power-adapter-current-boost-regulator for an example.</p>

About text formats

ePower_905

ebookaktiv
Designer152721

ebookaktiv

Member for

7 years 2 months

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

<p>This is a circuit design for a typical wall-plug power adapter.</p><p>The sinusoidal source represents a typical US 60 Hz, 120V AC wall supply.</p><p>A transformer steps the voltage down to a manageable range to be rectified for a 5V DC supply, but the waveform is still sinusoidal.</p><p>The 4 diode bridge rectifier takes this lower amplitude sinusoidal signal and produces a DC biased result, but still with noise resulting from the rectification process.</p><p>The capacitor before the voltage regulator chip helps smooth some of this noise. Then the regulator chip provides a self-contained, feedback controlled mechanism to keep the output voltage at the specified value.</p><p>The output capacitor further smooths any output ripple and provides a reservoir of charge to supply any surge in current load that may be encountered.</p><p>This example includes a load resistor that allows the exploration of the effects of load. The load is varied during the simulation and it can be seen that above a load of 100 mA, the regulation of the output voltage begins to deteriorate.</p><p>The addition of a few components can make it possible for such a circuit to provide significantly higher power loads. See http://www.systemvision.com/design/ac-dc-power-adapter-current-boost-regulator for an example.</p>

About text formats

Copy of AC-DC Power Adapter - on Wed, 01/29/2020 - 17:53

ed.guti
Designer229291

PartQuest Explore

ed.guti

Member for

4 years 10 months

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

<p>This is a circuit design for a typical wall-plug power adapter.</p><p>The sinusoidal source represents a typical US 60 Hz, 120V AC wall supply.</p><p>A transformer steps the voltage down to a manageable range to be rectified for a 5V DC supply, but the waveform is still sinusoidal.</p><p>The 4 diode bridge rectifier takes this lower amplitude sinusoidal signal and produces a DC biased result, but still with noise resulting from the rectification process.</p><p>The capacitor before the voltage regulator chip helps smooth some of this noise. Then the regulator chip provides a self-contained, feedback controlled mechanism to keep the output voltage at the specified value.</p><p>The output capacitor further smooths any output ripple and provides a reservoir of charge to supply any surge in current load that may be encountered.</p><p>This example includes a load resistor that allows the exploration of the effects of load. The load is varied during the simulation and it can be seen that above a load of 100 mA, the regulation of the output voltage begins to deteriorate.</p><p>The addition of a few components can make it possible for such a circuit to provide significantly higher power loads. See http://www.systemvision.com/design/ac-dc-power-adapter-current-boost-regulator for an example.</p>

About text formats

Copy of AC-DC Power Adapter - on Wed, 01/29/2020 - 12:05

kraftman
Designer229282

PartQuest Explore

kraftman

Member for

4 years 10 months

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

<p>This is a circuit design for a typical wall-plug power adapter.</p><p>The sinusoidal source represents a typical US 60 Hz, 120V AC wall supply.</p><p>A transformer steps the voltage down to a manageable range to be rectified for a 5V DC supply, but the waveform is still sinusoidal.</p><p>The 4 diode bridge rectifier takes this lower amplitude sinusoidal signal and produces a DC biased result, but still with noise resulting from the rectification process.</p><p>The capacitor before the voltage regulator chip helps smooth some of this noise. Then the regulator chip provides a self-contained, feedback controlled mechanism to keep the output voltage at the specified value.</p><p>The output capacitor further smooths any output ripple and provides a reservoir of charge to supply any surge in current load that may be encountered.</p><p>This example includes a load resistor that allows the exploration of the effects of load. The load is varied during the simulation and it can be seen that above a load of 100 mA, the regulation of the output voltage begins to deteriorate.</p><p>The addition of a few components can make it possible for such a circuit to provide significantly higher power loads. See http://www.systemvision.com/design/ac-dc-power-adapter-current-boost-regulator for an example.</p>

About text formats