Copy of Hydraulic Car Lift with Induction Motor Driven Pump - on Sun, 07/30/2023 - 12:44 Designer248067 × 0 designs 1 groups Welcome to the community!! https://explore.partquest.com/node/602395 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/602395"></iframe> Title Description <p>This example is a car lift powered by a three-phase induction motor driven pump. Three valves are used to control the pump outlet flow, directing it either to the extend port of the hydraulic cylinder or to the tank return. When pressurized, the cylinder lifts the 2000 kg vehicle.</p> <p>The simulation results show the motor phase A current and shaft speed (see upper left waveform viewer, zoomed in on initial start-up time), as well as the lift position of the car and the extend port pressure (upper right viewer).</p> About text formats Tags hydraulicsInduction MotorThree Phaseelectro-fluidic Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
Copy of Fuel Injector and Pressure Regulator System - on Sun, 07/09/2023 - 17:19 Designer247313 × 0 designs 1 groups Welcome to the community!! https://explore.partquest.com/node/600909 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/600909"></iframe> Title Description <p>This fuel injection example demonstrates the ability to integrate a broad range of engineering disciplines to model a complete mechatronic system. This includes a DC motor/pump and pressure regulator system, an electro-hydraulic fuel injector, and a mixed-signal (analog + digital) drive circuit that regulates the injector current.</p> <p>The design shows the ability to reduce the current after injection-start, for the purpose of improved efficiency. This leverages a characteristic that is common to electro-magnets, in that a lower current is needed to "hold" the magnet closed than is needed for "pull-in".</p> <p>An alternate pressure regulation design, that varies the voltage of the pump to control the outlet pressure, is show in this companion design: https://www.systemvision.com/design/direct-fuel-pressure-regulation-pump-drive-control</p> About text formats Tags Pressure RegulatorFuel Injectorhydraulicselectro-fluidic Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
Copy of Fuel Injector and Pressure Regulator System - on Thu, 07/06/2023 - 15:27 Designer247201 × 0 designs 1 groups Welcome to the community!! https://explore.partquest.com/node/600674 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/600674"></iframe> Title Description <p>This fuel injection example demonstrates the ability to integrate a broad range of engineering disciplines to model a complete mechatronic system. This includes a DC motor/pump and pressure regulator system, an electro-hydraulic fuel injector, and a mixed-signal (analog + digital) drive circuit that regulates the injector current.</p> <p>The design shows the ability to reduce the current after injection-start, for the purpose of improved efficiency. This leverages a characteristic that is common to electro-magnets, in that a lower current is needed to "hold" the magnet closed than is needed for "pull-in".</p> <p>An alternate pressure regulation design, that varies the voltage of the pump to control the outlet pressure, is show in this companion design: https://www.systemvision.com/design/direct-fuel-pressure-regulation-pump-drive-control</p> About text formats Tags Pressure RegulatorFuel Injectorhydraulicselectro-fluidic Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
Fuel Injector and Pressure Regulator System Designer242603 × 0 designs 1 groups I'm a member of the PartQuest Explore community. https://explore.partquest.com/node/509644 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/509644"></iframe> Title Description <p>This fuel injection example demonstrates the ability to integrate a broad range of engineering disciplines to model a complete mechatronic system. This includes a DC motor/pump and pressure regulator system, an electro-hydraulic fuel injector, and a mixed-signal (analog + digital) drive circuit that regulates the injector current.</p> <p>The design shows the ability to reduce the current after injection-start, for the purpose of improved efficiency. This leverages a characteristic that is common to electro-magnets, in that a lower current is needed to "hold" the magnet closed than is needed for "pull-in".</p> <p>An alternate pressure regulation design, that varies the voltage of the pump to control the outlet pressure, is show in this companion design: https://www.systemvision.com/design/direct-fuel-pressure-regulation-pump-drive-control</p> About text formats Tags Pressure RegulatorFuel Injectorhydraulicselectro-fluidic Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
Fuel Injector and Pressure Regulator System Designer242603 × 0 designs 1 groups I'm a member of the PartQuest Explore community. https://explore.partquest.com/node/509644 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/509644"></iframe> Title Description <p>This fuel injection example demonstrates the ability to integrate a broad range of engineering disciplines to model a complete mechatronic system. This includes a DC motor/pump and pressure regulator system, an electro-hydraulic fuel injector, and a mixed-signal (analog + digital) drive circuit that regulates the injector current.</p> <p>The design shows the ability to reduce the current after injection-start, for the purpose of improved efficiency. This leverages a characteristic that is common to electro-magnets, in that a lower current is needed to "hold" the magnet closed than is needed for "pull-in".</p> <p>An alternate pressure regulation design, that varies the voltage of the pump to control the outlet pressure, is show in this companion design: https://www.systemvision.com/design/direct-fuel-pressure-regulation-pump-drive-control</p> About text formats Tags Pressure RegulatorFuel Injectorhydraulicselectro-fluidic Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
Fuel Injector Only System Designer19 × 0 designs 10 groups Member of the PartQuest Explore Development Team. Focused on modeling and simulation of analog, mixed-signal and multi-discipline systems covering a broad range of applications, including power electronics, controls and mechatronic systems. https://explore.partquest.com/node/422298 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/422298"></iframe> Title Description <p>This fuel injection example demonstrates the ability to integrate a broad range of engineering disciplines to model a complete mechatronic system. This includes an electro-magnetic fuel injector and a mixed-signal (analog + digital) drive circuit that regulates the injector current. The design shows the ability to reduce the current after injection-start, for the purpose of improved efficiency. This leverages a characteristic that is common to electro-magnets, in that a lower current is needed to "hold" the magnet closed than is needed for "pull-in".</p> About text formats Tags Pressure RegulatorFuel Injectorhydraulicselectro-fluidic Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
Fuel Injector and Pressure Regulator System - on Wed, 03/17/2021 - 16:03 Designer216469 × 0 designs 1 groups Add a bio to your profile to share information about yourself with other SystemVision users. https://explore.partquest.com/node/421828 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/421828"></iframe> Title Description <p>This fuel injection example demonstrates the ability to integrate a broad range of engineering disciplines to model a complete mechatronic system. This includes a DC motor/pump and pressure regulator system, an electro-hydraulic fuel injector, and a mixed-signal (analog + digital) drive circuit that regulates the injector current.</p> <p>The design shows the ability to reduce the current after injection-start, for the purpose of improved efficiency. This leverages a characteristic that is common to electro-magnets, in that a lower current is needed to "hold" the magnet closed than is needed for "pull-in".</p> <p>An alternate pressure regulation design, that varies the voltage of the pump to control the outlet pressure, is show in this companion design: https://www.systemvision.com/design/direct-fuel-pressure-regulation-pump-drive-control</p> About text formats Tags Pressure RegulatorFuel Injectorhydraulicselectro-fluidic Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
Copy of Fuel Injector and Pressure Regulator System - on Wed, 03/17/2021 - 16:02 Designer216469 × 0 designs 1 groups Add a bio to your profile to share information about yourself with other SystemVision users. https://explore.partquest.com/node/421823 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/421823"></iframe> Title Description <p>This fuel injection example demonstrates the ability to integrate a broad range of engineering disciplines to model a complete mechatronic system. This includes a DC motor/pump and pressure regulator system, an electro-hydraulic fuel injector, and a mixed-signal (analog + digital) drive circuit that regulates the injector current.</p> <p>The design shows the ability to reduce the current after injection-start, for the purpose of improved efficiency. This leverages a characteristic that is common to electro-magnets, in that a lower current is needed to "hold" the magnet closed than is needed for "pull-in".</p> <p>An alternate pressure regulation design, that varies the voltage of the pump to control the outlet pressure, is show in this companion design: https://www.systemvision.com/design/direct-fuel-pressure-regulation-pump-drive-control</p> About text formats Tags Pressure RegulatorFuel Injectorhydraulicselectro-fluidic Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
Copy of Fuel Injector and Pressure Regulator System - on Wed, 03/17/2021 - 16:02 Designer216469 × 0 designs 1 groups Add a bio to your profile to share information about yourself with other SystemVision users. https://explore.partquest.com/node/421823 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/421823"></iframe> Title Description <p>This fuel injection example demonstrates the ability to integrate a broad range of engineering disciplines to model a complete mechatronic system. This includes a DC motor/pump and pressure regulator system, an electro-hydraulic fuel injector, and a mixed-signal (analog + digital) drive circuit that regulates the injector current.</p> <p>The design shows the ability to reduce the current after injection-start, for the purpose of improved efficiency. This leverages a characteristic that is common to electro-magnets, in that a lower current is needed to "hold" the magnet closed than is needed for "pull-in".</p> <p>An alternate pressure regulation design, that varies the voltage of the pump to control the outlet pressure, is show in this companion design: https://www.systemvision.com/design/direct-fuel-pressure-regulation-pump-drive-control</p> About text formats Tags Pressure RegulatorFuel Injectorhydraulicselectro-fluidic Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
Copy of Fuel Injector and Pressure Regulator System Solenoid Drive Inductor Only - on Tue, 03/16/2021 - 21:17 Designer208 × 0 designs 8 groups https://explore.partquest.com/node/421474 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/421474"></iframe> Title Description About text formats Tags Pressure RegulatorFuel Injectorhydraulicselectro-fluidic Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
