Copy of Hydraulic Car Lift with Induction Motor Driven Pump - on Thu, 10/15/2020 - 22:28 MASADesigner208 × MASA Member for 9 years 10 months 579 designs 8 groups https://explore.partquest.com/node/360391 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/360391"></iframe> Title Description <p>この例は、三相誘導電動機駆動のポンプを動力源とするカーリフトである。3 つのバルブがポンプ出口の流れを制御するために使用され、それを油圧シリンダの延長ポートまたはタンクのリターンのいずれかに指示します。加圧されると、シリンダーは 2000 kg の車両を持ち上げます。</p> <p>シミュレーション結果は、モータのA相電流と軸回転数(左上の波形ビューアを参照、初期起動時間を拡大)と、車両のリフト位置とエクステンドポートの圧力(右上のビューア)を示しています。</p> About text formats Tags hydraulicsInduction MotorThree Phaseelectro-fluidic Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
Fuel Injector and Pressure Regulator System - Freewheeling- on Mon, 09/28/2020 - 17:54 Wayne LawsonDesigner232735 × Wayne Lawson Member for 4 years 6 months 48 designs 4 groups https://explore.partquest.com/node/344839 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/344839"></iframe> Title Description <p>This fuel injection example demonstrates the ability to integrate a broad range of engineering disciplines to model a complete mechatronic system. This includes a DC motor/pump and pressure regulator system, an electro-hydraulic fuel injector, and a mixed-signal (analog + digital) drive circuit that regulates the injector current.</p> <p>The design shows the ability to reduce the current after injection-start, for the purpose of improved efficiency. This leverages a characteristic that is common to electro-magnets, in that a lower current is needed to "hold" the magnet closed than is needed for "pull-in".</p> <p>An alternate pressure regulation design, that varies the voltage of the pump to control the outlet pressure, is show in this companion design: https://www.systemvision.com/design/direct-fuel-pressure-regulation-pump-drive-control</p> About text formats Tags Pressure RegulatorFuel Injectorhydraulicselectro-fluidic Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
Fuel Injector and Pressure Regulator System - Avalanche Wayne LawsonDesigner232735 × Wayne Lawson Member for 4 years 6 months 48 designs 4 groups https://explore.partquest.com/node/344838 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/344838"></iframe> Title Description <p>This fuel injection example demonstrates the ability to integrate a broad range of engineering disciplines to model a complete mechatronic system. This includes a DC motor/pump and pressure regulator system, an electro-hydraulic fuel injector, and a mixed-signal (analog + digital) drive circuit that regulates the injector current.</p> <p>The design shows the ability to reduce the current after injection-start, for the purpose of improved efficiency. This leverages a characteristic that is common to electro-magnets, in that a lower current is needed to "hold" the magnet closed than is needed for "pull-in".</p> <p>An alternate pressure regulation design, that varies the voltage of the pump to control the outlet pressure, is show in this companion design: https://www.systemvision.com/design/direct-fuel-pressure-regulation-pump-drive-control</p> About text formats Tags Pressure RegulatorFuel Injectorhydraulicselectro-fluidic Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
Copy of Fuel Injector and Pressure Regulator System - on Mon, 09/28/2020 - 09:52 andrew.berryDesigner233379 × andrew.berry Member for 4 years 5 months 85 designs 3 groups BAdd a bio to your profile to share information about yourself with other SystemVision users. https://explore.partquest.com/node/344836 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/344836"></iframe> Title Description <p>This fuel injection example demonstrates the ability to integrate a broad range of engineering disciplines to model a complete mechatronic system. This includes a DC motor/pump and pressure regulator system, an electro-hydraulic fuel injector, and a mixed-signal (analog + digital) drive circuit that regulates the injector current.</p> <p>The design shows the ability to reduce the current after injection-start, for the purpose of improved efficiency. This leverages a characteristic that is common to electro-magnets, in that a lower current is needed to "hold" the magnet closed than is needed for "pull-in".</p> <p>An alternate pressure regulation design, that varies the voltage of the pump to control the outlet pressure, is show in this companion design: https://www.systemvision.com/design/direct-fuel-pressure-regulation-pump-drive-control</p> About text formats Tags Pressure RegulatorFuel Injectorhydraulicselectro-fluidic Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
Copy of Hydraulic Car Lift with Induction Motor Driven Pump - on Wed, 09/09/2020 - 20:12 harrisrobertj88Designer234631 × harrisrobertj88 Member for 4 years 4 months 2 designs 1 groups Add a bio to your profile to share information about yourself with other SystemVision users. https://explore.partquest.com/node/339789 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/339789"></iframe> Title Description <p>This example is a car lift powered by a three-phase induction motor driven pump. Three valves are used to control the pump outlet flow, directing it either to the extend port of the hydraulic cylinder or to the tank return. When pressurized, the cylinder lifts the 2000 kg vehicle.</p> <p>The simulation results show the motor phase A current and shaft speed (see upper left waveform viewer, zoomed in on initial start-up time), as well as the lift position of the car and the extend port pressure (upper right viewer).</p> About text formats Tags hydraulicsInduction MotorThree Phaseelectro-fluidic Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
Copy of Hydraulic Car Lift with Induction Motor Driven Pump - on Tue, 09/01/2020 - 14:24 abdoulayesarr712Designer234493 × abdoulayesarr712 Member for 4 years 4 months 0 designs 1 groups Add a bio to your profile to share information about yourself with other SystemVision users. https://explore.partquest.com/node/338055 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/338055"></iframe> Title Description <p>This example is a car lift powered by a three-phase induction motor driven pump. Three valves are used to control the pump outlet flow, directing it either to the extend port of the hydraulic cylinder or to the tank return. When pressurized, the cylinder lifts the 2000 kg vehicle.</p> <p>The simulation results show the motor phase A current and shaft speed (see upper left waveform viewer, zoomed in on initial start-up time), as well as the lift position of the car and the extend port pressure (upper right viewer).</p> About text formats Tags hydraulicsInduction MotorThree Phaseelectro-fluidic Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
Copy of Hydraulic Car Lift with Induction Motor Driven Pump - on Tue, 09/01/2020 - 14:19 abdoulayesarr712Designer234493 × abdoulayesarr712 Member for 4 years 4 months 0 designs 1 groups Add a bio to your profile to share information about yourself with other SystemVision users. https://explore.partquest.com/node/338054 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/338054"></iframe> Title Description <p>This example is a car lift powered by a three-phase induction motor driven pump. Three valves are used to control the pump outlet flow, directing it either to the extend port of the hydraulic cylinder or to the tank return. When pressurized, the cylinder lifts the 2000 kg vehicle.</p> <p>The simulation results show the motor phase A current and shaft speed (see upper left waveform viewer, zoomed in on initial start-up time), as well as the lift position of the car and the extend port pressure (upper right viewer).</p> About text formats Tags hydraulicsInduction MotorThree Phaseelectro-fluidic Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
Copy of Hydraulic Car Lift with Induction Motor Driven Pump - on Tue, 09/01/2020 - 14:19 abdoulayesarr712Designer234493 × abdoulayesarr712 Member for 4 years 4 months 0 designs 1 groups Add a bio to your profile to share information about yourself with other SystemVision users. https://explore.partquest.com/node/338053 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/338053"></iframe> Title Description <p>This example is a car lift powered by a three-phase induction motor driven pump. Three valves are used to control the pump outlet flow, directing it either to the extend port of the hydraulic cylinder or to the tank return. When pressurized, the cylinder lifts the 2000 kg vehicle.</p> <p>The simulation results show the motor phase A current and shaft speed (see upper left waveform viewer, zoomed in on initial start-up time), as well as the lift position of the car and the extend port pressure (upper right viewer).</p> About text formats Tags hydraulicsInduction MotorThree Phaseelectro-fluidic Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
Copy of Hydraulic Car Lift with Induction Motor Driven Pump - on Mon, 08/31/2020 - 14:41 skvasovDesigner234451 × skvasov Member for 4 years 4 months 2 designs 1 groups Add a bio to your profile to share information about yourself with other SystemVision users. https://explore.partquest.com/node/337555 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/337555"></iframe> Title Description <p>This example is a car lift powered by a three-phase induction motor driven pump. Three valves are used to control the pump outlet flow, directing it either to the extend port of the hydraulic cylinder or to the tank return. When pressurized, the cylinder lifts the 2000 kg vehicle.</p> <p>The simulation results show the motor phase A current and shaft speed (see upper left waveform viewer, zoomed in on initial start-up time), as well as the lift position of the car and the extend port pressure (upper right viewer).</p> About text formats Tags hydraulicsInduction MotorThree Phaseelectro-fluidic Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
Copy of Hydraulic Car Lift with Induction Motor Driven Pump - on Thu, 08/27/2020 - 21:33 bh2001Designer234397 × bh2001 Member for 4 years 4 months 1 designs 1 groups Add a bio to your profile to share information about yourself with other SystemVision users. https://explore.partquest.com/node/336750 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/336750"></iframe> Title Description <p>This example is a car lift powered by a three-phase induction motor driven pump. Three valves are used to control the pump outlet flow, directing it either to the extend port of the hydraulic cylinder or to the tank return. When pressurized, the cylinder lifts the 2000 kg vehicle.</p> <p>The simulation results show the motor phase A current and shaft speed (see upper left waveform viewer, zoomed in on initial start-up time), as well as the lift position of the car and the extend port pressure (upper right viewer).</p> About text formats Tags hydraulicsInduction MotorThree Phaseelectro-fluidic Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -