EPS | PartQuest™ Explore

EPS System with PMSM Motor and Toshiba TPHR7904PB Power MOSFET_mueda

MASA
Designer208

MASA

Member for

9 years 9 months

579

designs

8

groups

Description

This Electric Power Steering (EPS) System design includes a PWM Switching Inverter circuit that uses Toshiba TPHR7904PB Power MOSFETs. The drive includes a D-Q control algorithm, and uses space-vector modulation (SVM) to generate digital PWM signals. These control the ON/OFF state of the switches.The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, the first gain/pole-zero block (far left) specifies the amount of "torque_assist" gain (assist torque as a multiple of the vehicle operator's torque applied to the steering wheel), as well as providing compensation to improve system stability.This design focuses on the performance of the switches in the inverter circuit, including tracking of the thermal characteristics of one representative switch. In a companion version of this design, "EPS System with PMSM - Pre-Circuit Design for Toshiba Drive", Clarke and Park Transform models are used with a continuous ideal voltage drive, and provides much faster simulation results with a focus on overall system dynamic performance.

About text formats

EPS System with MotorSolve Generated PMSM Model and DQ/SVM Drive_1

MASA
Designer208

MASA

Member for

9 years 9 months

579

designs

8

groups

Description

This Electric Power Steering (EPS) System design includes a MotorSolve generated Permanent Magnet Synchronous Machine (PMSM) model and a PWM Drive circuit. The drive includes a D-Q control algorithm, and uses space-vector modulation (SVM) to generate the digital PWM signals to the switches of the bridge.The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, a non-linear gain profile is specified in the "torque_assist_table" function, and a lead-lag compensator is used to improve system stability.In a companion version of this design, "EPS System with MotorSolve Generated PMSM Model and Ideal Drive", Clarke and Park Transform models are used with a continuous ideal voltage drive. This shows the ability to develop motor controls and drives at the abstract level and also at the circuit level.

About text formats

TEXTBOOK2017_Charpter3and4_EPS_Park_ENC

tsukasa
Designer218862

tsukasa

Member for

5 years 5 months

1

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

About text formats

EPS System with PMSM - Pre-Circuit Design for Toshiba Drive

Mike Donnelly
Designer19

Mike Donnelly

Member for

11 years

1,697

designs

10

groups

Member of the PartQuest Explore Development Team. Focused on modeling and simulation of analog, mixed-signal and multi-discipline systems covering a broad range of applications, including power electronics, controls and mechatronic systems.

Description

This design includes an ideal Permanent Magnet Synchronous Machine (PMSM) model, as well as a continuous D-Q controller and drive circuit. The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, the first gain/pole-zero block (far left) specifies the amount of "torque_assist" gain (assist torque as a multiple of the vehicle operator's torque applied to the steering wheel), as well as providing compensation to improve system stability.Note that this is a "tunable" design. Many of these system parameters can be changed by the user. Then a new simulation can be run and the updated results can be observed in the waveform viewers.A companion design, "EPS System with PMSM Motor and Toshiba SSM3K33R Power MOSFET", uses a sampled-data D-Q control algorithm and space-vector modulation (SVM) to control Toshiba SSM3K333R Power MOSFET switches in a switching inverter circuit. That design forcuses on the performance and temperature monitoring of those switches.

About text formats

EPS System with PMSM Motor and Toshiba TPHR7904PB Power MOSFET

Mike Donnelly
Designer19

Mike Donnelly

Member for

11 years

1,697

designs

10

groups

Member of the PartQuest Explore Development Team. Focused on modeling and simulation of analog, mixed-signal and multi-discipline systems covering a broad range of applications, including power electronics, controls and mechatronic systems.

Description

This Electric Power Steering (EPS) System design includes a PWM Switching Inverter circuit that uses Toshiba TPHR7904PB Power MOSFETs. The drive includes a D-Q control algorithm, and uses space-vector modulation (SVM) to generate digital PWM signals. These control the ON/OFF state of the switches.

The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, the first gain/pole-zero block (far left) specifies the amount of "torque_assist" gain (assist torque as a multiple of the vehicle operator's torque applied to the steering wheel), as well as providing compensation to improve system stability.

This design focuses on the performance of the switches in the inverter circuit, including tracking of the thermal characteristics of one representative switch. In a companion version of this design, "EPS System with PMSM - Pre-Circuit Design for Toshiba Drive", Clarke and Park Transform models are used with a continuous ideal voltage drive, and provides much faster simulation results with a focus on overall system dynamic performance.

About text formats

TEXTBOOK2017_Charpter3and4_EPS_Park_ENC

Egami
Designer138196

Egami

Member for

7 years 4 months

19

designs

3

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

About text formats

EPS System with MotorSolve Generated PMSM Model and DQ/SVM Drive

Subhash_1
Designer209631

Subhash_1

Member for

5 years 10 months

7

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This Electric Power Steering (EPS) System design includes a MotorSolve generated Permanent Magnet Synchronous Machine (PMSM) model and a PWM Drive circuit. The drive includes a D-Q control algorithm, and uses space-vector modulation (SVM) to generate the digital PWM signals to the switches of the bridge.The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, a non-linear gain profile is specified in the "torque_assist_table" function, and a lead-lag compensator is used to improve system stability.In a companion version of this design, "EPS System with MotorSolve Generated PMSM Model and Ideal Drive", Clarke and Park Transform models are used with a continuous ideal voltage drive. This shows the ability to develop motor controls and drives at the abstract level and also at the circuit level.

About text formats