choke | PartQuest™ Explore

Copy of CAN Network Signaling - on Thu, 05/23/2024 - 11:54

Designer0

Member for

4 years 10 months

0

designs

0

groups

Description

This 4-node CAN network model is a "Live" design, meaning the user can change or "tune" various parameters shown in blue, and then run a new simulation to see the corresponding change in the signals received at each CAN node. These "tunable" parameters include the transmission line lengths, termination and choke parameter values, as well as select which of the CAN nodes is the transmitter.

In the network configuration shown, the parasitic capacitance at Node 4 causes asymmetric transitions. This asymmetry would normally result in EMI-causing even-mode propagating currents on the transmission lines, but the choke greatly reduces this effect. One interesting change the user can make is to set the choke inductance values to 0.0, effectively removing the choke from the network, and note the increase in the even-mode voltage wave on the adjacent transmission line.

The user can also save a copy of this design and enjoy full editing capability of the network configuration.

About text formats

Copy of CAN Network Signaling - on Sun, 04/21/2024 - 13:33

User-1713682739
Designer255942

User-1713682739

Member for

7 months

0

designs

1

groups

Welcome to the community!!

Description

This 4-node CAN network model is a "Live" design, meaning the user can change or "tune" various parameters shown in blue, and then run a new simulation to see the corresponding change in the signals received at each CAN node. These "tunable" parameters include the transmission line lengths, termination and choke parameter values, as well as select which of the CAN nodes is the transmitter.

In the network configuration shown, the parasitic capacitance at Node 4 causes asymmetric transitions. This asymmetry would normally result in EMI-causing even-mode propagating currents on the transmission lines, but the choke greatly reduces this effect. One interesting change the user can make is to set the choke inductance values to 0.0, effectively removing the choke from the network, and note the increase in the even-mode voltage wave on the adjacent transmission line.

The user can also save a copy of this design and enjoy full editing capability of the network configuration.

About text formats

Copy of CAN Network Signaling - on Wed, 04/10/2024 - 22:37

Designer0

Member for

4 years 10 months

0

designs

0

groups

Description

This 4-node CAN network model is a "Live" design, meaning the user can change or "tune" various parameters shown in blue, and then run a new simulation to see the corresponding change in the signals received at each CAN node. These "tunable" parameters include the transmission line lengths, termination and choke parameter values, as well as select which of the CAN nodes is the transmitter.

In the network configuration shown, the parasitic capacitance at Node 4 causes asymmetric transitions. This asymmetry would normally result in EMI-causing even-mode propagating currents on the transmission lines, but the choke greatly reduces this effect. One interesting change the user can make is to set the choke inductance values to 0.0, effectively removing the choke from the network, and note the increase in the even-mode voltage wave on the adjacent transmission line.

The user can also save a copy of this design and enjoy full editing capability of the network configuration.

About text formats

官方can总线示例

LMK-1711938796
Designer255470

LMK-1711938796

Member for

7 months 3 weeks

3

designs

2

groups

欢迎欢迎！

Description

This 4-node CAN network model is a "Live" design, meaning the user can change or "tune" various parameters shown in blue, and then run a new simulation to see the corresponding change in the signals received at each CAN node. These "tunable" parameters include the transmission line lengths, termination and choke parameter values, as well as select which of the CAN nodes is the transmitter.

In the network configuration shown, the parasitic capacitance at Node 4 causes asymmetric transitions. This asymmetry would normally result in EMI-causing even-mode propagating currents on the transmission lines, but the choke greatly reduces this effect. One interesting change the user can make is to set the choke inductance values to 0.0, effectively removing the choke from the network, and note the increase in the even-mode voltage wave on the adjacent transmission line.

The user can also save a copy of this design and enjoy full editing capability of the network configuration.

About text formats

Copy of CAN Network Signaling - on Mon, 03/25/2024 - 11:58

Designer0

Member for

4 years 10 months

0

designs

0

groups

Description

This 4-node CAN network model is a "Live" design, meaning the user can change or "tune" various parameters shown in blue, and then run a new simulation to see the corresponding change in the signals received at each CAN node. These "tunable" parameters include the transmission line lengths, termination and choke parameter values, as well as select which of the CAN nodes is the transmitter.

In the network configuration shown, the parasitic capacitance at Node 4 causes asymmetric transitions. This asymmetry would normally result in EMI-causing even-mode propagating currents on the transmission lines, but the choke greatly reduces this effect. One interesting change the user can make is to set the choke inductance values to 0.0, effectively removing the choke from the network, and note the increase in the even-mode voltage wave on the adjacent transmission line.

The user can also save a copy of this design and enjoy full editing capability of the network configuration.

About text formats

Copy of CAN Network Signaling - on Mon, 03/25/2024 - 11:58

Designer0

Member for

4 years 10 months

0

designs

0

groups

Description

This 4-node CAN network model is a "Live" design, meaning the user can change or "tune" various parameters shown in blue, and then run a new simulation to see the corresponding change in the signals received at each CAN node. These "tunable" parameters include the transmission line lengths, termination and choke parameter values, as well as select which of the CAN nodes is the transmitter.

In the network configuration shown, the parasitic capacitance at Node 4 causes asymmetric transitions. This asymmetry would normally result in EMI-causing even-mode propagating currents on the transmission lines, but the choke greatly reduces this effect. One interesting change the user can make is to set the choke inductance values to 0.0, effectively removing the choke from the network, and note the increase in the even-mode voltage wave on the adjacent transmission line.

The user can also save a copy of this design and enjoy full editing capability of the network configuration.

About text formats

Copy of CAN Network Signaling - on Mon, 03/25/2024 - 11:58

Designer0

Member for

4 years 10 months

0

designs

0

groups

Description

This 4-node CAN network model is a "Live" design, meaning the user can change or "tune" various parameters shown in blue, and then run a new simulation to see the corresponding change in the signals received at each CAN node. These "tunable" parameters include the transmission line lengths, termination and choke parameter values, as well as select which of the CAN nodes is the transmitter.

In the network configuration shown, the parasitic capacitance at Node 4 causes asymmetric transitions. This asymmetry would normally result in EMI-causing even-mode propagating currents on the transmission lines, but the choke greatly reduces this effect. One interesting change the user can make is to set the choke inductance values to 0.0, effectively removing the choke from the network, and note the increase in the even-mode voltage wave on the adjacent transmission line.

The user can also save a copy of this design and enjoy full editing capability of the network configuration.

About text formats

Copy of CAN Network Signaling - on Sun, 02/18/2024 - 13:08

User-1688571739
Designer247180

User-1688571739

Member for

1 year 4 months

6

designs

2

groups

Welcome to the community!!

Description

This 4-node CAN network model is a "Live" design, meaning the user can change or "tune" various parameters shown in blue, and then run a new simulation to see the corresponding change in the signals received at each CAN node. These "tunable" parameters include the transmission line lengths, termination and choke parameter values, as well as select which of the CAN nodes is the transmitter.

In the network configuration shown, the parasitic capacitance at Node 4 causes asymmetric transitions. This asymmetry would normally result in EMI-causing even-mode propagating currents on the transmission lines, but the choke greatly reduces this effect. One interesting change the user can make is to set the choke inductance values to 0.0, effectively removing the choke from the network, and note the increase in the even-mode voltage wave on the adjacent transmission line.

The user can also save a copy of this design and enjoy full editing capability of the network configuration.

About text formats

Copy of CAN Network Signaling - on Wed, 01/17/2024 - 19:55

User-1705492593
Designer253248

User-1705492593

Member for

10 months

3

designs

1

groups

Welcome to the community!!

Description

This 4-node CAN network model is a "Live" design, meaning the user can change or "tune" various parameters shown in blue, and then run a new simulation to see the corresponding change in the signals received at each CAN node. These "tunable" parameters include the transmission line lengths, termination and choke parameter values, as well as select which of the CAN nodes is the transmitter.

In the network configuration shown, the parasitic capacitance at Node 4 causes asymmetric transitions. This asymmetry would normally result in EMI-causing even-mode propagating currents on the transmission lines, but the choke greatly reduces this effect. One interesting change the user can make is to set the choke inductance values to 0.0, effectively removing the choke from the network, and note the increase in the even-mode voltage wave on the adjacent transmission line.

The user can also save a copy of this design and enjoy full editing capability of the network configuration.

About text formats

Copy of CAN Network Signaling - on Tue, 12/05/2023 - 14:00

User-1701794124
Designer252067

User-1701794124

Member for

11 months 2 weeks

2

designs

1

groups

Welcome to the community!!

Description

This 4-node CAN network model is a "Live" design, meaning the user can change or "tune" various parameters shown in blue, and then run a new simulation to see the corresponding change in the signals received at each CAN node. These "tunable" parameters include the transmission line lengths, termination and choke parameter values, as well as select which of the CAN nodes is the transmitter.

In the network configuration shown, the parasitic capacitance at Node 4 causes asymmetric transitions. This asymmetry would normally result in EMI-causing even-mode propagating currents on the transmission lines, but the choke greatly reduces this effect. One interesting change the user can make is to set the choke inductance values to 0.0, effectively removing the choke from the network, and note the increase in the even-mode voltage wave on the adjacent transmission line.

The user can also save a copy of this design and enjoy full editing capability of the network configuration.

About text formats

Terms of Use Cookie Notice Data Privacy Notice

Designer0

Member for

User-1713682739Designer255942

Member for

Designer0

Member for

LMK-1711938796Designer255470

Member for

Designer0

Member for

Designer0

Member for

Designer0

Member for

User-1688571739Designer247180

Member for

User-1705492593Designer253248

Member for

User-1701794124Designer252067

Member for

User-1713682739
Designer255942

LMK-1711938796
Designer255470

User-1688571739
Designer247180

User-1705492593
Designer253248

User-1701794124
Designer252067