Battery | PartQuest™ Explore

This circuit models a Li-Ion batteryBased on the following paper:Marek MICHALCZUK1, Bartłomiej UFNALSKI2, Lech M. GRZESIAK2, Piotr RUMNIAK2Politechnika Warszawska, Instytut Automatyki i Robotyki (1), Instytut Sterowania i Elektroniki Przemysłowej (2)Power converter-based electrochemical battery emulatorhttp://pe.org.pl/articles/2014/7/3.pdfStatus:This model replicates figure 6 in the above paper. The model is calibrated for a single 40Ah battery cell. This 40Ah calibration is represented by parameters values of 4 different blocks: I_meas Rsn_const C1n_const R1n_const To calibrate for a given cell capacity, Capacity_cell [Ah], modify the parameters according to these relationships: I_meas.K = 1/(Capacity_cell[Ah]*3600[s]) Rsn_const.OUTPUT_LEVEL = 3.1E-3[Ohm]*Capacity_cell[Ah]/40[Ah] R1n_const.OUTPUT_LEVEL = 1.9E-3[Ohm]*Capacity_cell[Ah]/40[Ah] C1n_const.OUTPUT_LEVEL = 22.75E3[Farad]*Capacity_cell[Ah]/40[Ah]

About text formats

Demonstration circuit Copied - Vic

VicenteAlonso
Designer206662

VicenteAlonso

Member for

6 years

2

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

JSAE_Battery_wt_weight

MTsuda
Designer200395

MTsuda

Member for

6 years 4 months

89

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

JSAE_Battery

MASA
Designer208

MASA

Member for

9 years 9 months

579

designs

8

groups

Demonstration circuit

rpoulin
Designer201579

rpoulin

Member for

6 years 2 months

5

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Battery reverse protection

AliHoussayki
Designer200281

AliHoussayki

Member for

6 years 4 months

2

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Li-Ion battery cell

Ben LeVine
Designer100316

Ben LeVine

Member for

7 years 10 months

19

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This circuit models a Li-Ion (LiFePo4) batteryBased on the following paper:Marek MICHALCZUK1, Bartłomiej UFNALSKI2, Lech M. GRZESIAK2, Piotr RUMNIAK2Politechnika Warszawska, Instytut Automatyki i Robotyki (1), Instytut Sterowania i Elektroniki Przemysłowej (2)Power converter-based electrochemical battery emulatorhttp://pe.org.pl/articles/2014/7/3.pdfStatus:This model replicates figure 6 in the above paper, with the addition of modeling a variable number of cells. The number of cells modeled can be changed by modifying the blocks:NCELLS_const &amp; NCELLS_reciprocal_constModify the values of these blocks to the number of cells and reciprocal of the number of cells, respectively.The model is calibrated for a single 40Ah battery cell (specifically, WB-LYP40AHA). This 40Ah calibration is represented by parameters values of 4 different blocks: I_meas Rsn_const C1_const R1_const To calibrate for a given cell capacity, Capacity_cell [Ah], modify the parameters according to these relationships: I_meas.K = 1/(Capacity_cell[Ah]*3600[s]) Rsn_const.OUTPUT_LEVEL = 3.1E-3[Ohm]*Capacity_cell[Ah]/40[Ah] R1_const.OUTPUT_LEVEL = 1.9E-3[Ohm]*Capacity_cell[Ah]/40[Ah] C1_const.OUTPUT_LEVEL = 22.75E3[Farad]*Capacity_cell[Ah]/40[Ah]

About text formats

Li-Ion battery cell (3 RC TDFS)

tangkongyuen
Designer198375

tangkongyuen

Member for

6 years 6 months

15

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This circuit models a Li-Ion (LiFePo4) batteryBased on the following paper:Marek MICHALCZUK1, Bartłomiej UFNALSKI2, Lech M. GRZESIAK2, Piotr RUMNIAK2Politechnika Warszawska, Instytut Automatyki i Robotyki (1), Instytut Sterowania i Elektroniki Przemysłowej (2)Power converter-based electrochemical battery emulatorhttp://pe.org.pl/articles/2014/7/3.pdfStatus:This model replicates figure 6 in the above paper, with the addition of modeling a variable number of cells. The number of cells modeled can be changed by modifying the blocks:NCELLS_const &amp; NCELLS_reciprocal_constModify the values of these blocks to the number of cells and reciprocal of the number of cells, respectively.The model is calibrated for a single 40Ah battery cell (specifically, WB-LYP40AHA). This 40Ah calibration is represented by parameters values of 4 different blocks: I_meas Rsn_const C1_const R1_const To calibrate for a given cell capacity, Capacity_cell [Ah], modify the parameters according to these relationships: I_meas.K = 1/(Capacity_cell[Ah]*3600[s]) Rsn_const.OUTPUT_LEVEL = 3.1E-3[Ohm]*Capacity_cell[Ah]/40[Ah] R1_const.OUTPUT_LEVEL = 1.9E-3[Ohm]*Capacity_cell[Ah]/40[Ah] C1_const.OUTPUT_LEVEL = 22.75E3[Farad]*Capacity_cell[Ah]/40[Ah]

About text formats

Terms of Use Cookie Notice Data Privacy Notice

Tomas_1Designer207728

Member for

Tomas_1Designer207728

Member for

Tomas_1Designer207728

Member for

VicenteAlonsoDesigner206662

Member for

MTsudaDesigner200395

Member for

MASADesigner208

Member for

rpoulinDesigner201579

Member for

AliHoussaykiDesigner200281

Member for

Ben LeVineDesigner100316

Member for

tangkongyuenDesigner198375

Member for

Tomas_1
Designer207728

Tomas_1
Designer207728

Tomas_1
Designer207728

VicenteAlonso
Designer206662

MTsuda
Designer200395

MASA
Designer208

rpoulin
Designer201579

AliHoussayki
Designer200281

Ben LeVine
Designer100316

tangkongyuen
Designer198375