switched capacitor | PartQuest™ Explore

Copy of Switched-Capacitor Filter Frequency Response using TDFS - on Fri, 03/20/2020 - 15:56

jeff.klaus80209
Designer230346

jeff.klaus80209

Member for

4 years 8 months

1

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This design shows the use of the TDFS (Time Domain Frequency Sweep) method to measure the frequency response of two low-pass filters. One is just a simple RC filter circuit with 1 kHz cut-off frequency. The other is an equivalent filter using a switched-capacitor implementation.

Both small-signal AC (frequency domain) and TDFS (time-domain) analyses are run, and both give the same results for the RC filter. However, because of the switching aspect of the switched-capacitor filter, the results of the AC analysis are meaningless for that circuit. However, the TDFS approach is valid for that filter also, as well as for any other circuit or system containing switching, sampled data or digital content.

For reference, note in the schematic that the R-C filter is connected to channel 1 of the TDFS instrument, and the switched capacitor filter is connected to channel 2, hence the v1 and v2 distinction in the name of the results for the magnitude (dbMag) and phase. Both are measured relative to the stimulus input vosc, the oscillator output.

About text formats

TDFS

ikguy
Designer7846

ikguy

Member for

9 years

12

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This design shows the use of the TDFS (Time Domain Frequency Sweep) method to measure the frequency response of two low-pass filters. One is just a simple RC filter circuit with 1 kHz cut-off frequency. The other is an equivalent filter using a switched-capacitor implementation.Both small-signal AC (frequency domain) and TDFS (time-domain) analyses are run, and both give the same results for the RC filter. However, because of the switching aspect of the switched-capacitor filter, the results of the AC analysis are meaningless for that circuit. However, the TDFS approach is valid for that filter also, as well as for any other circuit or system containing switching, sampled data or digital content.For reference, note in the schematic that the R-C filter is connected to channel 1 of the TDFS instrument, and the switched capacitor filter is connected to channel 2, hence the v1 and v2 distinction in the name of the results for the magnitude (dbMag) and phase. Both are measured relative to the stimulus input vosc, the oscillator output.

About text formats

test TDFS

Orestst
Designer172616

Orestst

Member for

6 years 10 months

33

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Switched-Capacitor Filter Frequency Response using TDFS

stefstep
Designer215105

stefstep

Member for

5 years 7 months

3

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This design shows the use of the TDFS (Time Domain Frequency Sweep) method to measure the frequency response of two low-pass filters. One is just a simple RC filter circuit with 1 kHz cut-off frequency. The other is an equivalent filter using a switched-capacitor implementation.Both small-signal AC (frequency domain) and TDFS (time-domain) analyses are run, and both give the same results for the RC filter. However, because of the switching aspect of the switched-capacitor filter, the results of the AC analysis are meaningless for that circuit. However, the TDFS approach is valid for that filter also, as well as for any other circuit or system containing switching, sampled data or digital content.For reference, note in the schematic that the R-C filter is connected to channel 1 of the TDFS instrument, and the switched capacitor filter is connected to channel 2, hence the v1 and v2 distinction in the name of the results for the magnitude (dbMag) and phase. Both are measured relative to the stimulus input vosc, the oscillator output.

About text formats

Switched-Capacitor Filter Frequency Response using TDFS

jarek
Designer212023

jarek

Member for

5 years 9 months

9

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This design shows the use of the TDFS (Time Domain Frequency Sweep) method to measure the frequency response of two low-pass filters. One is just a simple RC filter circuit with 1 kHz cut-off frequency. The other is an equivalent filter using a switched-capacitor implementation.Both small-signal AC (frequency domain) and TDFS (time-domain) analyses are run, and both give the same results for the RC filter. However, because of the switching aspect of the switched-capacitor filter, the results of the AC analysis are meaningless for that circuit. However, the TDFS approach is valid for that filter also, as well as for any other circuit or system containing switching, sampled data or digital content.For reference, note in the schematic that the R-C filter is connected to channel 1 of the TDFS instrument, and the switched capacitor filter is connected to channel 2, hence the v1 and v2 distinction in the name of the results for the magnitude (dbMag) and phase. Both are measured relative to the stimulus input vosc, the oscillator output.

About text formats

Switched-Capacitor Filter Frequency Response using TDFS

gmayankgautam180
Designer209642

gmayankgautam180

Member for

5 years 10 months

5

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This design shows the use of the TDFS (Time Domain Frequency Sweep) method to measure the frequency response of two low-pass filters. One is just a simple RC filter circuit with 1 kHz cut-off frequency. The other is an equivalent filter using a switched-capacitor implementation.Both small-signal AC (frequency domain) and TDFS (time-domain) analyses are run, and both give the same results for the RC filter. However, because of the switching aspect of the switched-capacitor filter, the results of the AC analysis are meaningless for that circuit. However, the TDFS approach is valid for that filter also, as well as for any other circuit or system containing switching, sampled data or digital content.For reference, note in the schematic that the R-C filter is connected to channel 1 of the TDFS instrument, and the switched capacitor filter is connected to channel 2, hence the v1 and v2 distinction in the name of the results for the magnitude (dbMag) and phase. Both are measured relative to the stimulus input vosc, the oscillator output.

About text formats

Switched-Capacitor Filter Frequency Response using TDFS

ANKIT
Designer208679

ANKIT

Member for

5 years 11 months

20

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This design shows the use of the TDFS (Time Domain Frequency Sweep) method to measure the frequency response of two low-pass filters. One is just a simple RC filter circuit with 1 kHz cut-off frequency. The other is an equivalent filter using a switched-capacitor implementation.Both small-signal AC (frequency domain) and TDFS (time-domain) analyses are run, and both give the same results for the RC filter. However, because of the switching aspect of the switched-capacitor filter, the results of the AC analysis are meaningless for that circuit. However, the TDFS approach is valid for that filter also, as well as for any other circuit or system containing switching, sampled data or digital content.For reference, note in the schematic that the R-C filter is connected to channel 1 of the TDFS instrument, and the switched capacitor filter is connected to channel 2, hence the v1 and v2 distinction in the name of the results for the magnitude (dbMag) and phase. Both are measured relative to the stimulus input vosc, the oscillator output.

About text formats

Stage test TDFS

Galina
Designer21

Galina

Member for

11 years

104

designs

3

groups

Member of the PartQuest Explore team.

COPY Switched-Capacitor Filter Frequency Response using TDFS

Galina
Designer21

Galina

Member for

11 years

104

designs

3

groups

Member of the PartQuest Explore team.

Description

This design shows the use of the TDFS (Time Domain Frequency Sweep) method to measure the frequency response of two low-pass filters. One is just a simple RC filter circuit with 1 kHz cut-off frequency. The other is an equivalent filter using a switched-capacitor implementation.Both small-signal AC (frequency domain) and TDFS (time-domain) analyses are run, and both give the same results for the RC filter. However, because of the switching aspect of the switched-capacitor filter, the results of the AC analysis are meaningless for that circuit. However, the TDFS approach is valid for that filter also, as well as for any other circuit or system containing switching, sampled data or digital content.For reference, note in the schematic that the R-C filter is connected to channel 1 of the TDFS instrument, and the switched capacitor filter is connected to channel 2, hence the v1 and v2 distinction in the name of the results for the magnitude (dbMag) and phase. Both are measured relative to the stimulus input vosc, the oscillator output.

About text formats

test TDFS

Mike Donnelly
Designer19

Mike Donnelly

Member for

11 years

1,697

designs

10

groups

Member of the PartQuest Explore Development Team. Focused on modeling and simulation of analog, mixed-signal and multi-discipline systems covering a broad range of applications, including power electronics, controls and mechatronic systems.

Terms of Use Cookie Notice Data Privacy Notice

jeff.klaus80209Designer230346

Member for

ikguyDesigner7846

Member for

OreststDesigner172616

Member for

stefstepDesigner215105

Member for

jarekDesigner212023

Member for

gmayankgautam180Designer209642

Member for

ANKITDesigner208679

Member for

GalinaDesigner21

Member for

GalinaDesigner21

Member for

Mike DonnellyDesigner19

Member for

jeff.klaus80209
Designer230346

ikguy
Designer7846

Orestst
Designer172616

stefstep
Designer215105

jarek
Designer212023

gmayankgautam180
Designer209642

ANKIT
Designer208679

Galina
Designer21

Galina
Designer21

Mike Donnelly
Designer19