state-of-charge | PartQuest™ Explore

This circuit models a Li-Ion (LiFePo4) batteryBased on the following paper:Marek MICHALCZUK1, Bartłomiej UFNALSKI2, Lech M. GRZESIAK2, Piotr RUMNIAK2Politechnika Warszawska, Instytut Automatyki i Robotyki (1), Instytut Sterowania i Elektroniki Przemysłowej (2)Power converter-based electrochemical battery emulatorhttp://pe.org.pl/articles/2014/7/3.pdfStatus:This model replicates figure 6 in the above paper, with the addition of modeling a variable number of cells. The number of cells modeled can be changed by modifying the blocks:NCELLS_const &amp; NCELLS_reciprocal_constModify the values of these blocks to the number of cells and reciprocal of the number of cells, respectively.The model is calibrated for a single 40Ah battery cell (specifically, WB-LYP40AHA). This 40Ah calibration is represented by parameters values of 4 different blocks: I_meas Rsn_const C1_const R1_const To calibrate for a given cell capacity, Capacity_cell [Ah], modify the parameters according to these relationships: I_meas.K = 1/(Capacity_cell[Ah]*3600[s]) Rsn_const.OUTPUT_LEVEL = 3.1E-3[Ohm]*Capacity_cell[Ah]/40[Ah] R1_const.OUTPUT_LEVEL = 1.9E-3[Ohm]*Capacity_cell[Ah]/40[Ah] C1_const.OUTPUT_LEVEL = 22.75E3[Farad]*Capacity_cell[Ah]/40[Ah]

About text formats

Dynamic Equivalent Circuit Model of LiFePO4 Batteries

Nicky
Designer206302

Nicky

Member for

5 years 10 months

9

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

About text formats

Li-Ion battery cell impedance test (current source)

MasonAdams_1
Designer214515

MasonAdams_1

Member for

5 years 5 months

5

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This circuit models a Li-Ion batteryBased on the following paper:Marek MICHALCZUK1, Bartłomiej UFNALSKI2, Lech M. GRZESIAK2, Piotr RUMNIAK2Politechnika Warszawska, Instytut Automatyki i Robotyki (1), Instytut Sterowania i Elektroniki Przemysłowej (2)Power converter-based electrochemical battery emulatorhttp://pe.org.pl/articles/2014/7/3.pdfStatus:This model replicates figure 6 in the above paper. The model is calibrated for a single 40Ah battery cell. This 40Ah calibration is represented by parameters values of 4 different blocks: I_meas Rsn_const C1n_const R1n_const To calibrate for a given cell capacity, Capacity_cell [Ah], modify the parameters according to these relationships: I_meas.K = 1/(Capacity_cell[Ah]*3600[s]) Rsn_const.OUTPUT_LEVEL = 3.1E-3[Ohm]*Capacity_cell[Ah]/40[Ah] R1n_const.OUTPUT_LEVEL = 1.9E-3[Ohm]*Capacity_cell[Ah]/40[Ah] C1n_const.OUTPUT_LEVEL = 22.75E3[Farad]*Capacity_cell[Ah]/40[Ah]

About text formats

Li-Ion battery cell

Tomas_1
Designer207728

Tomas_1

Member for

5 years 9 months

6

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This circuit models a Li-Ion (LiFePo4) batteryBased on the following paper:Marek MICHALCZUK1, Bartłomiej UFNALSKI2, Lech M. GRZESIAK2, Piotr RUMNIAK2Politechnika Warszawska, Instytut Automatyki i Robotyki (1), Instytut Sterowania i Elektroniki Przemysłowej (2)Power converter-based electrochemical battery emulatorhttp://pe.org.pl/articles/2014/7/3.pdfStatus:This model replicates figure 6 in the above paper, with the addition of modeling a variable number of cells. The number of cells modeled can be changed by modifying the blocks:NCELLS_const &amp; NCELLS_reciprocal_constModify the values of these blocks to the number of cells and reciprocal of the number of cells, respectively.The model is calibrated for a single 40Ah battery cell (specifically, WB-LYP40AHA). This 40Ah calibration is represented by parameters values of 4 different blocks: I_meas Rsn_const C1_const R1_const To calibrate for a given cell capacity, Capacity_cell [Ah], modify the parameters according to these relationships: I_meas.K = 1/(Capacity_cell[Ah]*3600[s]) Rsn_const.OUTPUT_LEVEL = 3.1E-3[Ohm]*Capacity_cell[Ah]/40[Ah] R1_const.OUTPUT_LEVEL = 1.9E-3[Ohm]*Capacity_cell[Ah]/40[Ah] C1_const.OUTPUT_LEVEL = 22.75E3[Farad]*Capacity_cell[Ah]/40[Ah]

About text formats

NaS battery cell at 350 C

Tomas_1
Designer207728

Tomas_1

Member for

5 years 9 months

6

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

About text formats

Hierachical battery Model with variable internal resistance

Tomas_1
Designer207728

Tomas_1

Member for

5 years 9 months

6

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

About text formats

Li-Ion battery cell impedance test

Tomas_1
Designer207728

Tomas_1

Member for

5 years 9 months

6

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This circuit models a Li-Ion batteryBased on the following paper:Marek MICHALCZUK1, Bartłomiej UFNALSKI2, Lech M. GRZESIAK2, Piotr RUMNIAK2Politechnika Warszawska, Instytut Automatyki i Robotyki (1), Instytut Sterowania i Elektroniki Przemysłowej (2)Power converter-based electrochemical battery emulatorhttp://pe.org.pl/articles/2014/7/3.pdfStatus:This model replicates figure 6 in the above paper. The model is calibrated for a single 40Ah battery cell. This 40Ah calibration is represented by parameters values of 4 different blocks: I_meas Rsn_const C1n_const R1n_const To calibrate for a given cell capacity, Capacity_cell [Ah], modify the parameters according to these relationships: I_meas.K = 1/(Capacity_cell[Ah]*3600[s]) Rsn_const.OUTPUT_LEVEL = 3.1E-3[Ohm]*Capacity_cell[Ah]/40[Ah] R1n_const.OUTPUT_LEVEL = 1.9E-3[Ohm]*Capacity_cell[Ah]/40[Ah] C1n_const.OUTPUT_LEVEL = 22.75E3[Farad]*Capacity_cell[Ah]/40[Ah]

About text formats

Li-Ion battery cell

Ben LeVine
Designer100316

Ben LeVine

Member for

7 years 8 months

19

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This circuit models a Li-Ion (LiFePo4) batteryBased on the following paper:Marek MICHALCZUK1, Bartłomiej UFNALSKI2, Lech M. GRZESIAK2, Piotr RUMNIAK2Politechnika Warszawska, Instytut Automatyki i Robotyki (1), Instytut Sterowania i Elektroniki Przemysłowej (2)Power converter-based electrochemical battery emulatorhttp://pe.org.pl/articles/2014/7/3.pdfStatus:This model replicates figure 6 in the above paper, with the addition of modeling a variable number of cells. The number of cells modeled can be changed by modifying the blocks:NCELLS_const &amp; NCELLS_reciprocal_constModify the values of these blocks to the number of cells and reciprocal of the number of cells, respectively.The model is calibrated for a single 40Ah battery cell (specifically, WB-LYP40AHA). This 40Ah calibration is represented by parameters values of 4 different blocks: I_meas Rsn_const C1_const R1_const To calibrate for a given cell capacity, Capacity_cell [Ah], modify the parameters according to these relationships: I_meas.K = 1/(Capacity_cell[Ah]*3600[s]) Rsn_const.OUTPUT_LEVEL = 3.1E-3[Ohm]*Capacity_cell[Ah]/40[Ah] R1_const.OUTPUT_LEVEL = 1.9E-3[Ohm]*Capacity_cell[Ah]/40[Ah] C1_const.OUTPUT_LEVEL = 22.75E3[Farad]*Capacity_cell[Ah]/40[Ah]

About text formats

Li-Ion battery cell (3 RC TDFS)

tangkongyuen
Designer198375

tangkongyuen

Member for

6 years 4 months

15

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This circuit models a Li-Ion (LiFePo4) batteryBased on the following paper:Marek MICHALCZUK1, Bartłomiej UFNALSKI2, Lech M. GRZESIAK2, Piotr RUMNIAK2Politechnika Warszawska, Instytut Automatyki i Robotyki (1), Instytut Sterowania i Elektroniki Przemysłowej (2)Power converter-based electrochemical battery emulatorhttp://pe.org.pl/articles/2014/7/3.pdfStatus:This model replicates figure 6 in the above paper, with the addition of modeling a variable number of cells. The number of cells modeled can be changed by modifying the blocks:NCELLS_const &amp; NCELLS_reciprocal_constModify the values of these blocks to the number of cells and reciprocal of the number of cells, respectively.The model is calibrated for a single 40Ah battery cell (specifically, WB-LYP40AHA). This 40Ah calibration is represented by parameters values of 4 different blocks: I_meas Rsn_const C1_const R1_const To calibrate for a given cell capacity, Capacity_cell [Ah], modify the parameters according to these relationships: I_meas.K = 1/(Capacity_cell[Ah]*3600[s]) Rsn_const.OUTPUT_LEVEL = 3.1E-3[Ohm]*Capacity_cell[Ah]/40[Ah] R1_const.OUTPUT_LEVEL = 1.9E-3[Ohm]*Capacity_cell[Ah]/40[Ah] C1_const.OUTPUT_LEVEL = 22.75E3[Farad]*Capacity_cell[Ah]/40[Ah]

About text formats

Terms of Use Cookie Notice Data Privacy Notice

Mason AdamsDesigner209116

Member for

Mason AdamsDesigner209116

Member for

NickyDesigner206302

Member for

MasonAdams_1Designer214515

Member for

Tomas_1Designer207728

Member for

Tomas_1Designer207728

Member for

Tomas_1Designer207728

Member for

Tomas_1Designer207728

Member for

Ben LeVineDesigner100316

Member for

tangkongyuenDesigner198375

Member for

Mason Adams
Designer209116

Mason Adams
Designer209116

Nicky
Designer206302

MasonAdams_1
Designer214515

Tomas_1
Designer207728

Tomas_1
Designer207728

Tomas_1
Designer207728

Tomas_1
Designer207728

Ben LeVine
Designer100316

tangkongyuen
Designer198375