ECM8000 Mic Preamp KGyDesigner135721 × KGy Member for 6 years 9 months 31 designs 1 groups Add a bio to your profile to share information about yourself with other SystemVision users. https://explore.partquest.com/node/544408 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/544408"></iframe> Title Description <p>The ECM8000 is a cheap but good enough measurement microphone with balanced (XLR) connection (using phantom power) and electret capsule. Its original circuit is impedance-balanced but uses unbalanced signal - which is usable but far not perfect.This circuit can replace the original one. It has larger output signal (cca +15dB), but the most significant enhancement is the balanced signals not only at output but at the input side too (having better than -50 dB unbalance on the output signal). It also has very low distortion and extremely small phase shift (less than 4 degrees in the audio range), so I believe it can be used for professional measurementes. However, it means a drawback too: the low limit of the passband is too deep (it goes below 1 Hz) therefore the low-cut filter is recommended to be switched on for other than measurement.</p> About text formats Tags audiopreampMicrophone Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
LPB1 BlotwulfDesigner130991 × Blotwulf Member for 6 years 10 months 1 designs 1 groups Add a bio to your profile to share information about yourself with other SystemVision users. https://explore.partquest.com/node/170806 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/170806"></iframe> Title Description <p>LPB-1</p> About text formats Tags audiopreamp Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
12v Pre amp and 30v D-Class Amp (mono) JustinBertrandDesigner55231 × JustinBertrand Member for 7 years 10 months 1 designs 1 groups Add a bio to your profile to share information about yourself with other SystemVision users. https://explore.partquest.com/node/79711 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/79711"></iframe> Title Description <p>30 volts D-CLASS amplifier powered by a 12 volts preamplifier.</p> About text formats Tags Amplifierd-classamppreampmonoaudio Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -
LPB1 FrankDavidMartnezMuozDesigner27501 × FrankDavidMartnezMuoz Member for 8 years 2 months 1 designs 1 groups Add a bio to your profile to share information about yourself with other SystemVision users. https://explore.partquest.com/node/46711 <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/46711"></iframe> Title Description <p>LPB-1</p> About text formats Tags audiopreamp Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None -